Talk:Power Cube v15.6: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(Created page with "=design optimization= ==tanks== ===size=== i think it would be benificial to make the fluid storage tanks a bit smaller to allow for nuts and bolts to be installed through t...")
 
 
Line 10: Line 10:
===mounting===
===mounting===


another option for mounting might be to weld 1" threaded rode or 1" pin with cotter pin hole to the tank such that a 8x8 standard plate would attach it to the 4x4 frame. --[[User:Dorkmo|Dorkmo]] ([[User talk:Dorkmo|talk]]) 03:53, 12 August 2015 (CEST)
another option for mounting might be to weld 1" threaded rods or 1" pins with cotter pin holes to the tank such that a 8x8 standard plate a either end would attach it to the 4x4 frame. --[[User:Dorkmo|Dorkmo]] ([[User talk:Dorkmo|talk]]) 03:53, 12 August 2015 (CEST)

Latest revision as of 01:54, 12 August 2015

design optimization

tanks

size

i think it would be benificial to make the fluid storage tanks a bit smaller to allow for nuts and bolts to be installed through the holes of the 4x4s at either end. --Dorkmo (talk) 03:53, 12 August 2015 (CEST)

Pcdesignidea20150811.png

mounting

another option for mounting might be to weld 1" threaded rods or 1" pins with cotter pin holes to the tank such that a 8x8 standard plate a either end would attach it to the 4x4 frame. --Dorkmo (talk) 03:53, 12 August 2015 (CEST)