Folgertech Kit: Difference between revisions
Jump to navigation
Jump to search
| Line 12: | Line 12: | ||
=Improvements= | =Improvements= | ||
'''Note: correction needs to be made based on the top 2 posts here - on end stop plug in location and change in firmware. [http://forums.reprap.org/read.php?406,512329,569248#msg-569248]. This Github note [https://github.com/therippa/Marlin] appears to say the same thing. | '''Note: correction needs to be made based on the top 2 posts here - on end stop plug in location and change in firmware. [http://forums.reprap.org/read.php?406,512329,569248#msg-569248]. This Github note [https://github.com/therippa/Marlin] appears to say the same thing. Further, the first link also states that the firmware is outdated - outside of hte xmax issue mentioned. | ||
The main improvement that we will make is adding automatic bed leveling. | The main improvement that we will make is adding automatic bed leveling. | ||
Revision as of 05:39, 31 January 2016
Source
- See [1]
Build Results
Build Pictures
See Folgertech Prusa i3 Google Drive].
Improvements
Note: correction needs to be made based on the top 2 posts here - on end stop plug in location and change in firmware. [2]. This Github note [3] appears to say the same thing. Further, the first link also states that the firmware is outdated - outside of hte xmax issue mentioned.
The main improvement that we will make is adding automatic bed leveling.
- Upgrade firmware, including auto bed level with inductive sensor - [4]
- Anti-backlash nut case and belt tensioner - [5]
- Improvements on Thingiverse - auto level, cable chain, endstop improvements, etc. - [6]
- X endstop replacement - [7]