Cura Settings: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 1: | Line 1: | ||
=.4 mm Nozzle on Lulzbot Mini= | =.4 mm Nozzle on Lulzbot Mini= | ||
This is what I did for 0.4 mm nozzle, as opposed to 0.5 standard. I reduced the values until the yellow highlight disappeared, assuming that the yellow highlight is no go. Result was stringy, so I left the settings at the 0.5 settings when using the 0.4 nozzle, and it worked much better. | |||
[[Image:lulz4.jpg|500px]] | [[Image:lulz4.jpg|500px]] | ||
[[Image:lulz42.jpg|200px]] | [[Image:lulz42.jpg|200px]] | ||
Revision as of 03:09, 23 April 2017
.4 mm Nozzle on Lulzbot Mini
This is what I did for 0.4 mm nozzle, as opposed to 0.5 standard. I reduced the values until the yellow highlight disappeared, assuming that the yellow highlight is no go. Result was stringy, so I left the settings at the 0.5 settings when using the 0.4 nozzle, and it worked much better.
