CEB Press v16.09/SCAD Files

work in progress

creating an OpenSCAD replica of v16.09

Frame

Assembly

F4x=31;  //?why not just 22?
F4y=11;
F4z=0.5;
F4basex=25;

F6x=22.1875;  //?why not just 22?
F6y=8;
F6z=0.5;

F8x=43.5;
F8y=6;
F8z=0.5;
F9x=43.5;
F9y=4.5;
F9z=0.5;
$fn=20;  //render final model at 100

// ----------------------- //
translate([0,(F8y/2)+F6z,20.472]) //Z from F9// //adjust with cylinder length//
rotate([90,0,0])
F4();  //?group with F5?
translate([0,-(F8y/2),20.472])
rotate([90,0,0])
F4();

translate([0,(F8y/2)+F6z,0])
rotate([90,0,0])
F6();
translate([0,-(F8y/2),0])
rotate([90,0,0])
F6();

translate([1.9-8.5,0,0]){
rotate([0,0,90]){
translate([(F8y/2),F8z,0])
rotate([90,-90,0])
F8();
translate([(F8y/2)+(F9z/2)-(F8z/2),0,0])
rotate([0,-90,0])
F9();
translate([-(F8y/2)+(F9z/2)+(F8z/2),0,0])
rotate([0,-90,0])
F9();
}
}

translate([-1.9+8.5,0,0]){
rotate([0,0,-90]){
translate([(F8y/2),F8z,0])
rotate([90,-90,0])
F8();
translate([(F8y/2)+(F9z/2)-(F8z/2),0,0])
rotate([0,-90,0])
F9();
translate([-(F8y/2)+(F9z/2)+(F8z/2),0,0])
rotate([0,-90,0])
F9();
}
}

// ----------------------- //

module F4(){
    difference(){
translate([-(F4x/2),0,0])
cube([F4x,F4y,F4z]);
translate([-(F4x/2),0,0])
cuts();
translate([(F4x/2),0,0])
mirror([1,0,0])
cuts();
} //end difference
module cuts(){
    translate([0,0,0]) 
        cube([3,5.375,F4z]); 

    translate([0,5.375,0])
    difference(){
        cube([3,5.125,F4z]);
        translate([3,0,0])
        rotate([0,0,atan(3/5.125)])
        cube([10,10,F4z]);
    }

translate([(F4x/2)-13.6375,F4y-0.5,0])
    mirror([1,0,0])
cube([(F4x/2)-13.6375,0.5,F4z]);
translate([(F4x/2)-13.6375,F4y-0.625,0])
cube([2,0.625,F4z]);

    translate([(F4x/2)-0.8125,F4y-0.5,0])
        cube([0.8125,0.5,F4z]);
    translate([(F4x/2)-1.0625,F4y-0.625,0])
        cube([0.25,0.625,F4z]);
    
    translate([(F4x/2)-9.8125,7.185,0]) //?part ycentered 7.5?
        cube([1.125,0.625,F4z]);  //?interfaces with what? ?part F2?
    
    translate([(F4x/2)-8.5,2,0])
        cylinder(h = F4z, r = 0.5025); //diameter 1.0?
    translate([(F4x/2)-8.5,6,0])
        cylinder(h = F4z, r = 0.5025);
    translate([(F4x/2)-8.5,9,0])
        cylinder(h = F4z, r = 0.5025);
    
} //end module
    
}

module F6(){
difference(){
translate([-(F6x/2),0,0])
cube([F6x,F6y,F6z]);
translate([-(F6x/2),0,0])
cuts();
translate([(F6x/2),0,0])
mirror([1,0,0])
cuts();
} //end difference
module cuts(){
    translate([1.26,F6y-0.5,0]) //?xdistance from center? 
        cube([1.125,0.5,F6z]); //?interfaces with what?

    translate([(F6x/2)-1.125,F6y-3.22,0])
        cube([2.25,3.22,F6z]);
    translate([F6x/2,F6y-3.22,0])
        cylinder(h = F6z, r = 1.125);
    
    translate([(F6x/2)-8.5,2,0])
        cylinder(h = F6z, r = 0.38); //diameter 0.76?
    translate([(F6x/2)-8.5,6,0])
        cylinder(h = F6z, r = 0.38);
    
} //end module
}

module F8(){
    difference(){
cube([F8x,F8y,F8z]);
    translate([-0.0625,0,0])
        cornerjoint(7.375,0.625,0.25,0.5,0.125);
    translate([14.5-0.0625,0,0])
        cornerjoint(7.375,0.625,0.25,0.5,0.125);
    translate([14.5+14.5-0.0625,0,0])
        cornerjoint(7.375,0.625,0.25,0.5,0.125);
    
    translate([-0.0625,F8y,0])
    mirror([0,1,0])
        cornerjoint(7.375,0.625,0.25,0.5,0.125);
    translate([14.5-0.0625,F8y,0])
    mirror([0,1,0])
        cornerjoint(7.375,0.625,0.25,0.5,0.125);
    translate([14.5+14.5-0.0625,F8y,0])
    mirror([0,1,0])
        cornerjoint(7.375,0.625,0.25,0.5,0.125);    
    
    hull(){
    translate([23.34,3,0])  //?x interfaces with what?
        cylinder(h = F8z, r = 0.5);
    translate([23.6,3,0])
        cylinder(h = F8z, r = 0.5);
    }
    
        hull(){
    translate([30.34,3,0])  //?x interfaces with what?
        cylinder(h = F8z, r = 0.5);
    translate([30.6,3,0])
        cylinder(h = F8z, r = 0.5);
    }
}
} //end F8 module

module F9(){
difference(){
cube([F9x,F9y,F9z]);
    translate([7.25,0,0])
        cornerjoint(7.25,0.625,0.25,0.5,0.125);
    translate([14.5+7.25,0,0])
        cornerjoint(7.25,0.625,0.25,0.5,0.125);
    translate([14.5+14.5+7.25,0,0])
        cornerjoint(7.25,0.625,0.25,0.5,0.125);
    
    translate([0,F9y-0.5625,0])
        cube([0.53125,0.5625,F9z]);
    translate([19.96875,F9y-0.5625,0])
        cube([0.5625,0.5625,F9z]);
    translate([31.3,F9y-1.4,0])
        cube([6.4,1.4,F9z]);    //?interfaces with what?
    translate([F9x-0.5,F9y-0.5625,0])
        cube([0.5,0.5625,F9z]);
    
    translate([2,1.9,0])  //?x interfaces with what?  ?1.9?
        cylinder(h = F9z, r = 0.38);
    translate([6,1.9,0])  //?x interfaces with what?
        cylinder(h = F9z, r = 0.38);   
        
    translate([22.472,1.9,0])  //??.472?? ?interfaces with what?
        cylinder(h = F9z, r = 0.5025);
    translate([26.472,1.9,0])
        cylinder(h = F9z, r = 0.5025);
    translate([29.472,1.9,0])
        cylinder(h = F9z, r = 0.5025);
    
    
    translate([39,1.9,0])  //?x interfaces with what?
        cylinder(h = F9z, r = 0.38);
    translate([42,1.9,0])  //?x interfaces with what?
        cylinder(h = F9z, r = 0.38);   
    }
} //end F9 module

module cornerjoint(L,H,EndGap,PadL,PadH){
    difference(){
     cube([L,H,F9z]);
        translate([EndGap,H-PadH,0])
        cube([PadL,PadH,F9z]);
        translate([L-EndGap-PadL,H-PadH,0])
        cube([PadL,PadH,F9z]);
    }
} //end cornerjoint module


 

F1

F1x=24.2;
F1y=6;
F1z=0.5;
$fn=20;  //render final model at 100

projection(cut = true) //use projection to create 2D DXF files
difference(){
translate([-(F1x/2),0,0])
cube([F1x,F1y,F1z]);
translate([-(F1x/2),0,0])
cuts();
translate([(F1x/2),0,0])
mirror([1,0,0])
cuts();
} //end difference
module cuts(){
        cube([0.5,0.5,F1z]);
    translate([0.5,0,0])
        cube([0.7875,0.625,F1z]);
    translate([0,F1y-0.25,0])
        cube([0.4,0.25,F1z]);
    translate([2.2875,F1y-0.5,0])
        cube([1.125,0.5,F1z]);
    translate([11.0375,0,0])
        cube([0.8125,0.625,F1z]);
    translate([11.85,0,0])
        cube([0.25,0.5,F1z]);
    translate([3.6,1.5,0])
        cylinder(h = F1z, r = 0.375);   
    translate([3.6,4.5,0])
        cylinder(h = F1z, r = 0.375);
    translate([6.1925,2.465,0])
        cylinder(h = F1z, r = 0.6);     
} //end module
 

F2

F2x=19.5;
F2y=3.5;
F2z=0.5;
$fn=20;  //render final model at 100

projection(cut = true) //use projection to create 2D DXF files
difference(){
translate([-(F2x/2),0,0])
cube([F2x,F2y,F2z]);
translate([-(F2x/2),0,0])
cuts();
translate([(F2x/2),0,0])
mirror([1,0,0])
cuts();
} //end difference
module cuts(){
    translate([1,F2y-0.625,0])
        cube([0.125,0.625,F2z]);
    translate([1.125,F2y-0.5,0])
        cube([8.625,0.5,F2z]);  
} //end module

 

F3

F3x=23.75;
F3y=3.5;
F3z=0.5;
$fn=20;  //render final model at 100

projection(cut = true) //use projection to create 2D DXF files
difference(){
translate([-(F3x/2),0,0])
cube([F3x,F3y,F3z]);
translate([-(F3x/2),0,0])
cuts();
translate([(F3x/2),0,0])
mirror([1,0,0])
cuts();
} //end difference
module cuts(){
    translate([1,0,0])
        cube([1,0.625,F3z]);
    translate([2,0,0])
        cube([1,0.5,F3z]);
    translate([3,0,0])
        cube([5.875,0.625,F3z]);
    translate([8.875,0,0])
        cube([1,0.5,F3z]);
    translate([9.875,0,0])
        cube([1,0.625,F3z]);
    translate([5.375,1.75,0])
        cylinder(h = F3z, r = 0.5);      
} //end module
 

F4

F4x=31;  //?why not just 22?
F4y=11;
F4z=0.5;
F4basex=25;
$fn=20;  //render final model at 100

projection(cut = true) //use projection to create 2D DXF files
difference(){
translate([-(F4x/2),0,0])
cube([F4x,F4y,F4z]);
translate([-(F4x/2),0,0])
cuts();
translate([(F4x/2),0,0])
mirror([1,0,0])
cuts();
} //end difference
module cuts(){
    translate([0,0,0]) 
        cube([3,5.375,F4z]); 

    translate([0,5.375,0])
    difference(){
        cube([3,5.125,F4z]);
        translate([3,0,0])
        rotate([0,0,atan(3/5.125)])
        cube([10,10,F4z]);
    }

translate([(F4x/2)-13.6375,F4y-0.5,0])
    mirror([1,0,0])
cube([(F4x/2)-13.6375,0.5,F4z]);
translate([(F4x/2)-13.6375,F4y-0.625,0])
cube([2,0.625,F4z]);

    translate([(F4x/2)-0.8125,F4y-0.5,0])
        cube([0.8125,0.5,F4z]);
    translate([(F4x/2)-1.0625,F4y-0.625,0])
        cube([0.25,0.625,F4z]);
    
    translate([(F4x/2)-9.8125,7.185,0]) //?part ycentered 7.5?
        cube([1.125,0.625,F4z]);  //?interfaces with what? ?part F2?
    
    translate([(F4x/2)-8.5,2,0])
        cylinder(h = F4z, r = 0.5025); //diameter 1.0?
    translate([(F4x/2)-8.5,6,0])
        cylinder(h = F4z, r = 0.5025);
    translate([(F4x/2)-8.5,9,0])
        cylinder(h = F4z, r = 0.5025);
    
} //end module
 
 
 

F5

F5x=31.4;
F5y=3.5;
F5z=0.5;
$fn=20;  //render final model at 100

projection(cut = true) //use projection to create 2D DXF files
difference(){
translate([-(F5x/2),0,0])
cube([F5x,F5y,F5z]);
translate([-(F5x/2),0,0])
cuts();
translate([(F5x/2),0,0])
mirror([1,0,0])
cuts();
} //end difference
module cuts(){
    translate([4,F5y-0.625,0])
        cube([1,0.625,F5z]);
    translate([5,F5y-0.5,0])
        cube([1,0.5,F5z]);
    translate([6,F5y-0.625,0])
        cube([6.7,0.625,F5z]);
    translate([12.7,F5y-0.5,0])
        cube([1,0.5,F5z]);
    translate([13.7,F5y-0.625,0])
        cube([1,0.625,F5z]);
    hull(){
    translate([3.5,1.5,0])
        cylinder(h = F5z, r = 0.5);
    translate([4.5,1.5,0])
        cylinder(h = F5z, r = 0.5);
    }
} //end module
 

F6

some errors of symmetry in source dxf drawing. made some assumptions. need to check fit with interfacing parts.

F6x=22.1875;  //?why not just 22?
F6y=8;
F6z=0.5;
$fn=20;  //render final model at 100

projection(cut = true) //use projection to create 2D DXF files
difference(){
translate([-(F6x/2),0,0])
cube([F6x,F6y,F6z]);
translate([-(F6x/2),0,0])
cuts();
translate([(F6x/2),0,0])
mirror([1,0,0])
cuts();
} //end difference
module cuts(){
    translate([1.26,F6y-0.5,0]) //?xdistance from center? 
        cube([1.125,0.5,F6z]); //?interfaces with what?

    translate([(F6x/2)-1.125,F6y-3.22,0])
        cube([2.25,3.22,F6z]);
    translate([F6x/2,F6y-3.22,0])
        cylinder(h = F6z, r = 1.125);
    
    translate([(F6x/2)-8.5,2,0])
        cylinder(h = F6z, r = 0.38); //diameter 0.76?
    translate([(F6x/2)-8.5,6,0])
        cylinder(h = F6z, r = 0.38);
    
} //end module
 

F8

F8x=43.5;
F8y=6;
F8z=0.5;
$fn=20;  //render final model at 100


difference(){
cube([F8x,F8y,F8z]);
    translate([-0.0625,0,0])
        cornerjoint(7.375,0.625,0.25,0.5,0.125);
    translate([14.5-0.0625,0,0])
        cornerjoint(7.375,0.625,0.25,0.5,0.125);
    translate([14.5+14.5-0.0625,0,0])
        cornerjoint(7.375,0.625,0.25,0.5,0.125);
    
    translate([-0.0625,F8y,0])
    mirror([0,1,0])
        cornerjoint(7.375,0.625,0.25,0.5,0.125);
    translate([14.5-0.0625,F8y,0])
    mirror([0,1,0])
        cornerjoint(7.375,0.625,0.25,0.5,0.125);
    translate([14.5+14.5-0.0625,F8y,0])
    mirror([0,1,0])
        cornerjoint(7.375,0.625,0.25,0.5,0.125);    
    
    hull(){
    translate([23.34,3,0])  //?x interfaces with what?
        cylinder(h = F8z, r = 0.5);
    translate([23.6,3,0])
        cylinder(h = F8z, r = 0.5);
    }
    
        hull(){
    translate([30.34,3,0])  //?x interfaces with what?
        cylinder(h = F8z, r = 0.5);
    translate([30.6,3,0])
        cylinder(h = F8z, r = 0.5);
    }
}

module cornerjoint(L,H,EndGap,PadL,PadH){
    difference(){
     cube([L,H,F8z]);
        translate([EndGap,H-PadH,0])
        cube([PadL,PadH,F8z]);
        translate([L-EndGap-PadL,H-PadH,0])
        cube([PadL,PadH,F8z]);
    }
} //end cornerjoint module
 

F9

F9x=43.5;
F9y=4.5;
F9z=0.5;
$fn=20;  //render final model at 100


difference(){
cube([F9x,F9y,F9z]);
    translate([7.25,0,0])
        cornerjoint(7.25,0.625,0.25,0.5,0.125);
    translate([14.5+7.25,0,0])
        cornerjoint(7.25,0.625,0.25,0.5,0.125);
    translate([14.5+14.5+7.25,0,0])
        cornerjoint(7.25,0.625,0.25,0.5,0.125);
    
    translate([0,F9y-0.5625,0])
        cube([0.53125,0.5625,F9z]);
    translate([19.96875,F9y-0.5625,0])
        cube([0.5625,0.5625,F9z]);
    translate([31.3,F9y-1.4,0])
        cube([6.4,1.4,F9z]);    //?interfaces with what?
    translate([F9x-0.5,F9y-0.5625,0])
        cube([0.5,0.5625,F9z]);
    
    translate([2,1.9,0])  //?x interfaces with what?  ?1.9?
        cylinder(h = F9z, r = 0.38);
    translate([6,1.9,0])  //?x interfaces with what?
        cylinder(h = F9z, r = 0.38);   
        
    translate([22.472,1.9,0])  //??.472?? ?interfaces with what?
        cylinder(h = F9z, r = 0.5025);
    translate([26.472,1.9,0])
        cylinder(h = F9z, r = 0.5025);
    translate([29.472,1.9,0])
        cylinder(h = F9z, r = 0.5025);
    
    
    translate([39,1.9,0])  //?x interfaces with what?
        cylinder(h = F9z, r = 0.38);
    translate([42,1.9,0])  //?x interfaces with what?
        cylinder(h = F9z, r = 0.38);   
    }


module cornerjoint(L,H,EndGap,PadL,PadH){
    difference(){
     cube([L,H,F9z]);
        translate([EndGap,H-PadH,0])
        cube([PadL,PadH,F9z]);
        translate([L-EndGap-PadL,H-PadH,0])
        cube([PadL,PadH,F9z]);
    }
} //end cornerjoint module
 

F10

F10x=5.9;
F10y=2;
F10z=0.5;

cube([F10x,F10y,F10y]);
 

F11

F11x=1.25;
F11y=6;
F11z=0.5;

projection(cut = true) //use projection to create 2D DXF files
difference(){
translate([0,-(F11y/2),0])
cube([F11x,F11y,F11z]);
translate([0,-(F11y/2),0])
cuts();
translate([0,(F11y/2),0])
mirror([0,1,0])
cuts();
} //end difference
module cuts(){
    translate([0.5,0,0])
        cube([0.125,0.625,F11z]);
    translate([0.625,0,0])
        cube([0.625,0.5,F11z]);
  
} //end module
 

Arms

A1

A1x=4;
A1y=72;
A1z=0.5;
$fn=20;

difference(){
    cube([A1x,A1y,A1z]);
    
    translate([0,0.71875,0])
    cube([0.6875,0.5625,A1z]);
    translate([0,44.8501,0]) //?y.8501?
    cube([0.6875,0.5625,A1z]);
    translate([0,70.9688,0])  //y 0.46875 from top
    cube([0.6875,0.5625,A1z]);
    
    translate([2,2,0])
    cylinder(h = A1z, r = 0.4);
    translate([2,4,0])
    cylinder(h = A1z, r = 0.4);   
   
       translate([2,27,0])
    cylinder(h = A1z, r = 0.4); 
    
        translate([2,37,0])
    cylinder(h = A1z, r = 0.4);
    
    hull(){
            translate([2,39.67,0]) //small error on drawing
    cylinder(h = A1z, r = 0.4);
            translate([2,40.25,0]) //small error on drawing
    cylinder(h = A1z, r = 0.4);
    }
    
    hull(){
            translate([2,50.25,0]) //small error
    cylinder(h = A1z, r = 0.4);
            translate([2,50.85,0]) //small error
    cylinder(h = A1z, r = 0.4);
    }
    
        translate([2,53.75,0])
    cylinder(h = A1z, r = 0.4);    translate([2,56.75,0])
    cylinder(h = A1z, r = 0.4);
    
        translate([2,63.75,0])
    cylinder(h = A1z, r = 0.4);
        translate([2,69,0])
    cylinder(h = A1z, r = 0.4);
    
    //corner joints
    for(i=[0:5])
    translate([4,i*11.9375,0])
    rotate([0,0,90])
    cornerjoint(6.0625,0.625,0.125,0.5,0.125);
    
}

module cornerjoint(L,H,EndGap,PadL,PadH){
    difference(){
     cube([L,H,A1z]);
        translate([EndGap,H-PadH,0])
        cube([PadL,PadH,A1z]);
        translate([L-EndGap-PadL,H-PadH,0])
        cube([PadL,PadH,A1z]);
    }
} //end cornerjoint module
 

A2

A2x=5.96603;  //?just 6?
A2y=72;
A2z=0.5;
$fn=20;

difference(){
    cube([A2x,A2y,A2z]);
    
    translate([A2x-0.6875,0.46875,0])
    cube([0.6875,0.5625,A2z]);
    translate([A2x-0.6875,26.5874,0]) //?y.8501?
    cube([0.6875,0.5625,A2z]);
    translate([A2x-0.6875,A2y-0.71875,0])  //y 0.46875 from top
    cube([0.6875,0.5625,A2z]);
    
    hull(){
    translate([A2x-1.75,21.2,0])   //?y?
    cylinder(h = A2z, r = 0.4);
    translate([A2x-1.75,22.765,0]) //?y?
    cylinder(h = A2z, r = 0.4);   
    }
    
    hull(){
    translate([A2x-1.75,47.56,0]) //?y?
    cylinder(h = A2z, r = 0.4);
    translate([A2x-1.75,49.0785,0]) //?y?
    cylinder(h = A2z, r = 0.4);   
    }
       
//corner joints
    for(i=[0:5])
    translate([0,(i*12)+6,0])
    rotate([0,0,270])
    cornerjoint(6,0.625,0.125,0.5,0.125);
    
}

module cornerjoint(L,H,EndGap,PadL,PadH){
    difference(){
     cube([L,H,A2z]);
        translate([EndGap,H-PadH,0])
        cube([PadL,PadH,A2z]);
        translate([L-EndGap-PadL,H-PadH,0])
        cube([PadL,PadH,A2z]);
    }
} //end cornerjoint module