CEB Press v17.08 Workshop Improvement Notes: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=Sourcing Issues= *2 pieces missing from CNC cutting; need to make sure that materials are available the week before the event and that they are inventoried - or we inventory...") |
No edit summary |
||
| Line 1: | Line 1: | ||
=Sourcing Issues= | =Sourcing Issues= | ||
*2 pieces missing from CNC cutting; need to make sure that materials are available the week before the event and that they are inventoried - or we inventory our own cutting. This is the first time that a steel order was not correct - the CNC shop is at fault here. | *2 pieces missing from CNC cutting; need to make sure that materials are available the week before the event and that they are inventoried - or we inventory our own cutting. This is the first time that a steel order was not correct - the CNC shop is at fault here. | ||
*Solution - picking an old part of old machine (secondary arms) | |||
=Design= | =Design= | ||
*Tabs on top frame pieces and mid frame pieces are bowing in from the welding. Needs complete ability to weld back and forth until a good weld happens | *Tabs on top frame pieces and mid frame pieces are bowing in from the welding. Needs complete ability to weld back and forth until a good weld happens | ||
| Line 10: | Line 10: | ||
:*We are down from 6 known working to 4 known working MIGs and 3 stick welders. | :*We are down from 6 known working to 4 known working MIGs and 3 stick welders. | ||
:*Definite case for open source version of welder so any issue can be addressed readily. Or convert the stick welders to MIG by addition of wire feeder + gas. | :*Definite case for open source version of welder so any issue can be addressed readily. Or convert the stick welders to MIG by addition of wire feeder + gas. | ||
=Morale= | |||
*Definitely people are excited, so things are good | |||
* | |||
Revision as of 18:39, 25 August 2017
Sourcing Issues
- 2 pieces missing from CNC cutting; need to make sure that materials are available the week before the event and that they are inventoried - or we inventory our own cutting. This is the first time that a steel order was not correct - the CNC shop is at fault here.
- Solution - picking an old part of old machine (secondary arms)
Design
- Tabs on top frame pieces and mid frame pieces are bowing in from the welding. Needs complete ability to weld back and forth until a good weld happens
Equipment
- Gas went out on 1 welder during the workshop (gas solenoid issue?)
- Gas was already out on 1 welder, but that wasn't checked prior to the workshop. Tighter quality control on welders needs to happen before workshop.
- We are down from 6 known working to 4 known working MIGs and 3 stick welders.
- Definite case for open source version of welder so any issue can be addressed readily. Or convert the stick welders to MIG by addition of wire feeder + gas.
Morale
- Definitely people are excited, so things are good