CEB Press Controller v17.08: Difference between revisions
Jump to navigation
Jump to search
| Line 32: | Line 32: | ||
==arduino + relay module + DPDT switches w/ plain wire== | ==arduino + relay module + DPDT toggle switches w/ plain wire== | ||
[https://en.wikipedia.org/wiki/Switch#Contact_terminology DPDT Switches] used to operate solenoids and send 5v signal to arduino that solenoid is engaged, or auxilary use. | [https://en.wikipedia.org/wiki/Switch#Contact_terminology DPDT Switches] used to operate solenoids and send 5v signal to arduino that solenoid is engaged, or auxilary use. | ||
| Line 39: | Line 39: | ||
[https://docs.google.com/drawings/d/1oW8M_2zTL2WhdBVOBDlx8sNVcLj--e0mlWJrJRTb_x8/edit drive] | [https://docs.google.com/drawings/d/1oW8M_2zTL2WhdBVOBDlx8sNVcLj--e0mlWJrJRTb_x8/edit drive] | ||
*(2) 6P DPST toggle switch [https://www.grainger.com/product/HONEYWELL-Toggle-Switch-24D451 grainger] | |||
*(9) one position .1" connector [https://www.pololu.com/product/1900] | *(9) one position .1" connector [https://www.pololu.com/product/1900] | ||
| Line 46: | Line 48: | ||
*(6) M-F crimped .1" cable [https://www.pololu.com/product/1804] [https://www.pololu.com/product/1801] | *(6) M-F crimped .1" cable [https://www.pololu.com/product/1804] [https://www.pololu.com/product/1801] | ||
*(8) M-M crimped .1" cable [https://www.pololu.com/product/1805] [https://www.pololu.com/product/1802] | *(8) M-M crimped .1" cable [https://www.pololu.com/product/1805] [https://www.pololu.com/product/1802] | ||
==arduino + relay module + DPDT push button switches w/ plain wire== | |||
*(4) push button 4P DPST switch [https://www.digikey.com/product-detail/en/e-switch/PR14EC1100/EG4700-ND/2116179 digikey] | |||
=Links= | =Links= | ||
*[[CEB Press Controller Genealogy]] | *[[CEB Press Controller Genealogy]] | ||
Revision as of 22:06, 1 September 2017
Working Document
Bill of Materials
- https://www.pololu.com/product/1905
- 4 Channel Relay Switch Module
- https://www.adafruit.com/product/1445
- Zener Diode
- Resistor 10K
- Diode
- on/off switch, 2 connectors grainger
Diagram
Arduino with OSE Controller Board
- Based on 2014 work of CEB Press 6 - Controller Module - Electronics Layout
- See build instructions - CEB Press 6 Controller
arduino + relay w/ plain wire
arduino + relay module + DPDT toggle switches w/ plain wire
DPDT Switches used to operate solenoids and send 5v signal to arduino that solenoid is engaged, or auxilary use.
- (2) 6P DPST toggle switch grainger
- (9) one position .1" connector [1]
- (2) four position .1" connector [2]
- (1) five position .1" connector [3]
- (1) six position .1" connector [4]
- (6) M-F crimped .1" cable [5] [6]
- (8) M-M crimped .1" cable [7] [8]
arduino + relay module + DPDT push button switches w/ plain wire
- (4) push button 4P DPST switch digikey