CEB Press Controller v17.08: Difference between revisions
Jump to navigation
Jump to search
| Line 50: | Line 50: | ||
*(8) M-M crimped .1" cable [https://www.pololu.com/product/1805] [https://www.pololu.com/product/1802] | *(8) M-M crimped .1" cable [https://www.pololu.com/product/1805] [https://www.pololu.com/product/1802] | ||
==arduino + relay module + | ==arduino + relay module + DPST push button switches w/ plain wire== | ||
<html><img src="https://docs.google.com/drawings/d/e/2PACX-1vRUvqvDvAY61QjRvhPUho2ukHOKXuG1zZoODeL-kouqcfhitApBiv7Yo17AUbASe5o6X2sXIer0b0US/pub?w=400"></html> | <html><img src="https://docs.google.com/drawings/d/e/2PACX-1vRUvqvDvAY61QjRvhPUho2ukHOKXuG1zZoODeL-kouqcfhitApBiv7Yo17AUbASe5o6X2sXIer0b0US/pub?w=400"></html> | ||
Revision as of 01:56, 12 September 2017
Working Document
Bill of Materials
- https://www.pololu.com/product/1905
- 4 Channel Relay Switch Module
- https://www.adafruit.com/product/1445
- Zener Diode
- Resistor 10K
- Diode
- on/off switch, 2 connectors grainger
- (3) cable gland adafruit digikey
Diagram
Arduino with OSE Controller Board
- Based on 2014 work of CEB Press 6 - Controller Module - Electronics Layout
- See build instructions - CEB Press 6 Controller
arduino + relay w/ plain wire
arduino + relay module + DPDT toggle switches w/ plain wire
DPDT Switches used to operate solenoids and send 5v signal to arduino that solenoid is engaged, or auxilary use.
- (2) 6P DPST toggle switch grainger
- (9) one position .1" connector [1]
- (2) four position .1" connector [2]
- (1) five position .1" connector [3]
- (1) six position .1" connector [4]
- (6) M-F crimped .1" cable [5] [6]
- (8) M-M crimped .1" cable [7] [8]
arduino + relay module + DPST push button switches w/ plain wire
- (4) push button 4P DPST switch digikey waytek
- (16) 0.187 Female Quick Connect Insulated Terminals Mouser
- (4) PG-7 Cable Glands Mouser