CEB Press v17.08 Design + Function: Difference between revisions
No edit summary |
|||
| Line 6: | Line 6: | ||
<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vTizYupL4HSzjPVivhHpbWZJ5XXCtTnlOJ5G8qifOHzMQkjhNUStHOVcfCDpBdiEwP56lmXQYYRgrmW/embed?start=false&loop=false&delayms=3000#4" frameborder="0" width="960" height="569" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html> | <html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vTizYupL4HSzjPVivhHpbWZJ5XXCtTnlOJ5G8qifOHzMQkjhNUStHOVcfCDpBdiEwP56lmXQYYRgrmW/embed?start=false&loop=false&delayms=3000#4" frameborder="0" width="960" height="569" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html> | ||
[https://docs.google.com/presentation/d/1ITZPT5dSDMs_2q3t-ijj3eC7j1GWCpbe99dprmVASLQ/edit#slide=id.g27b48854a0_0_16 edit] | |||
=Pressure Setting= | =Pressure Setting= | ||
The operating pressure of the machine is | The operating pressure of the machine is | ||
Revision as of 05:29, 6 October 2017
General
The OSE CEB Press is a bottom press- blocks are pressed by the main cylinder from the bottom. A soil loading drawer loads soil into the compression chamber. Soil is loaded from the top of the machine using a tractor loader from one side of the machine. The blocks are ejected on the opposite side of the machine, away from the loading side - so that machine loading and unloading can happen safely at the same time. The blocks are pressed agains the surface of the soil loading drawer, and typical operating pressure for CEBs is 2200-2300 PSI to achieve proper compreesion. No advantage in block quality is obtained by running above this pressure.
The full sequence of pressing steps under automatic operation is found in this diagram:
Pressure Setting
The operating pressure of the machine is