Ruslan Log

Fri Dec 15, 2017

Looked for literature about technical standard in a library. Some interesting German documents are:

• DIN EN ISO 1452-3 Kunststoff-Rohrleitungssysteme für die Wasserversorgung und für erdverlegte und nicht erdverlegte Entwässerungs- und Abwasserdruckleitungen - Weichmacherfreies Polyvinylchlorid (PVC-U) - Teil 3: Formstücke (ISO 1452-3:2009).
• DIN EN ISO 1877-3 Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Chloriertes Polyvinylchlorid (PVC-C) - Teil 3: Formstücke (ISO 15877-3:2009 + AMD 1:2010); The same as DIN ISO 1452-3 but for PVC-C.

Some documents with possibly useful information:

• DIN EN ISO 3126 Kunststoff-Rohrleitungssysteme - Rohrleitungsteile aus Kunststoffen - Bestimmung der Maße (ISO 3126:2005); It describes how to measure pipes.

Book:

The standards contains too much information spread in many documents. They are also expensive to obtain. Maybe books are better.

• Piping databook, Nayyar, Mohinder L., McGraw-Hill 2002. It containments measurements for some pipes and fittings in one place. It is not clear, if this information is sufficient for CAD-files.

Sat Dec 10, 2017

Uploaded improved elbow FreeCAD marco File:Create-elbow.fcmacro with GUI. It can create some 40 Schedule 90°-elbows.

TODO

• Add more parts. Add progress information -- the macro needs some time to create an elbow, but the user does not have any feedback when clicks OK.
• All previous macros are experiments and not a finished work. Find out these Idea behind the macros is good enough. If it is, complete one macro.
• Maybe it is better to use a repository instead of loading each change to the Wiki?
• Find out what is Wrong with FreeCAD. Why cannot I do a cross section (easily)?)

Sun Dec 9, 2017

Improved version of elbow-macro.

Problems

I tried to create a cross section of the pipe elbow for documentation. For some reasons I cannot cat the elbow by a large box. With small box it works. Very annoying :(.

Thu Dec 7, 2017

Worked on new elbow macro. Now I used sweep for whole elbow. The work around from Dec 6 is no more necessary.

Tue Dec 5, 2017

PVC_Pipe_and_Fittings_Library: Improved FreeCAD marco File:Add-elbow.fcmacro. It creates now a single solid part.

Problems solved

The Problem union of parts from Sun. Dec 3., 2017, I solved by changing the outer radius of the bent part. See [1].

Sun Dec 3, 2017

PVC_Pipe_and_Fittings_Library: Created FreeCAD cad file for a PVC elbowFile:Pvc-elbow-test-60deg.fcstd. Created FreeCAD marco File:Add-elbow.fcmacro to add an elbow to the active document.

Problems

• I cannot make an union of three elbow parts.

Problems solved

• FreeCAD sweep-function cannot sweep a complex sketch -- for example with two circles. Spitting sketch into multiple sketches helped.

TODO

Add gui to the macro and find standard dimensions for the elbows.

Sat Dec 2, 2017

PVC_Pipe_and_Fittings_Library: Created FreeCAD file for a PVC pipe File:Pvc-pipe-nps-sch40-1d8.fcstd. Created FreeCAD Marco File:Pvc-pipe-nps.fcmacro to add 40 or 80 schedule PVC pipes. Useful links: OSE_Part_Library, PVC_Pipe.

Problems:

• I have no experience with FreeCAD macros and Python GUI-Library. The macro code is experimental. I do not know how to integrate my macro into FreeCAD .

Questions:

• There is a note in the wiki-editor "Please note that all contributions to Open Source Ecology are considered to be released under the CreativeCommons". But I would like to release some of my code under public domain license. Is it OK?
• Where I enter hours, which I spent for the project?

Fri Dec 1, 2017

I spent time looking for information about pipes. I tried to find answer to the questions:

• What are important standards?
• Is PVC really good material? Are there some environment friendlier alternatives?
• What are the appropriate technical terms in German? A verbatim translation PVC-Rohr seems not to a frequent term.

Sat Nov 25, 2017

I created the first working log entry.

File:Rk-ose-dev-test.fcstd