Open Source Continuous Charcoal Production Device: Difference between revisions
Jump to navigation
Jump to search
(Added some more information.) |
m (Minor typo fix) |
||
| Line 7: | Line 7: | ||
- Use the [[D3D Ceramic Printer]] instead of metal barrels to increase core temperature, as well as prevent degredation due to rust. | - Use the [[D3D Ceramic Printer]] instead of metal barrels to increase core temperature, as well as prevent degredation due to rust. | ||
- Add automation to the auger | - Add automation to the auger via a control circuit, a servo motor, and some sort of sensor | ||
- Add temperature probes for checking everything is going smoothly + troubleshooting issues | - Add temperature probes for checking everything is going smoothly + troubleshooting issues | ||
- Add a feedstock auger system | - Add a feedstock auger system | ||
Revision as of 01:53, 2 January 2018
Basics
- Something like this essentially:
- May be slightly more refined though
- Use the D3D Ceramic Printer instead of metal barrels to increase core temperature, as well as prevent degredation due to rust.
- Add automation to the auger via a control circuit, a servo motor, and some sort of sensor
- Add temperature probes for checking everything is going smoothly + troubleshooting issues
- Add a feedstock auger system