1 Meter Printer: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=Intro= This is the maximum allowable size for a multiplexed 8 mm Universal Axis system. *Axes are doubled up on the x and y axes to provide the necessary stiffness *TB6600 dr...") |
|||
| Line 8: | Line 8: | ||
*Designed for simple fabrication, without need of CNC Cutting. | *Designed for simple fabrication, without need of CNC Cutting. | ||
*Frame can be welded or epoxied | *Frame can be welded or epoxied | ||
*120V AC nichrome bed heater | *120V AC custom nichrome bed heater via [[Nichrome Calculator]] | ||
Revision as of 19:15, 14 May 2018
Intro
This is the maximum allowable size for a multiplexed 8 mm Universal Axis system.
- Axes are doubled up on the x and y axes to provide the necessary stiffness
- TB6600 drivers are used to multiplex the stepper drive
- RAMPS is used minus the Pololu drivers, which are replaced by the TB6600
- frame is build from 1/8"x2" steel, bonded into a cubic space frame
Production Engineering
- Designed for simple fabrication, without need of CNC Cutting.
- Frame can be welded or epoxied
- 120V AC custom nichrome bed heater via Nichrome Calculator