Nesting Software: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 3: | Line 3: | ||
=Open Source Nesting Software= | =Open Source Nesting Software= | ||
*deepnest - [https://github.com/Jack000/Deepnest github] | *deepnest - [https://github.com/Jack000/Deepnest github] | ||
**after changing settings such as "space between parts" and "DXF import units", close the program, open, then re-import file. | |||
*SVGnest http://svgnest.com/ - [https://github.com/Jack000/SVGnest Github] | *SVGnest http://svgnest.com/ - [https://github.com/Jack000/SVGnest Github] | ||
**file must be in SVG format | **file must be in SVG format | ||
Revision as of 17:30, 5 August 2018
Used to rearrange shapes in the most optimized way to fit within a given area.
Open Source Nesting Software
- deepnest - github
- after changing settings such as "space between parts" and "DXF import units", close the program, open, then re-import file.
- SVGnest http://svgnest.com/ - Github
- file must be in SVG format
- must create a shape of the material to be cut from in the model
- svg conversion and unit change are causing issues
- OpenSCAD's notes on SVG->EPS->DXF https://en.wikibooks.org/wiki/OpenSCAD_User_Manual/Other_2D_formats#SVG
- Slicr? - need to test
- FreeCAD Nester forum link announcing 'Nester'
- https://github.com/kallaballa/libnfporb