Revision as of 00:40, 8 September 2018

Goals

Torch table using standard flat bar and angle iron for structural support. borrowing electronics from D3D CNC Torch Table.
Possibly use multiple ball bearing rollers with spring support to tolerate debris on bar surface
3D printed mounting points that minimize drilling/welding

1/4" x 6" x 9' Flat Bar - discount steel
1-1/2" x 1-1/2" x 1/8" x 9' Angle - discount steel
R6 Ball Bearing - grainger
Stepper motor NEMA 17 - reprap page
- Oriental Motor PKP246D15A2 specs
  - Hirose Connector MDF97-5S-3.5C mouser
  - Hirose Connector MDF97-22SC mouser
  - Crimper (no necessary?) mouser

@@ Line 9: / Line 9: @@
 *R6 Ball Bearing - [https://www.grainger.com/product/NTN-Radial-Ball-Bearing-1L038 grainger]
 *Stepper motor NEMA 17 - [https://reprap.org/wiki/NEMA_17_Stepper_motor reprap page]
+**Oriental Motor PKP246D15A2 [https://catalog.orientalmotor.com/item/2-phase-bipolar-stepper-motors/42mm-pkp-series-2-phase-bipolar-stepper-motors/pkp246d15a2 specs]
+***Hirose Connector MDF97-5S-3.5C [https://www.mouser.com/ProductDetail/Hirose-Connector/MDF97-5S-35C?qs=vcbW%252b4%252bSTIrjj36qYybb9A%3D%3D mouser]
+***Hirose Connector MDF97-22SC [https://www.mouser.com/ProductDetail/Hirose-Connector/MDF97-22SC?qs=sGAEpiMZZMvz8LftK4jernixpnpxSrc2q%2fr%252bJtSGQwU%3d mouser]
+***Crimper (no necessary?) [https://www.mouser.com/ProductDetail/Hirose-Connector/HT801-MDF97-22S?qs=sGAEpiMZZMuHCD5%2fnvq3PowRLDXIUs3ryatPKmkg%2fYABIse26YX4CQ%3d%3d mouser]
 =Design=