Revision as of 23:00, 12 November 2018

Print Cooling Fan

Adding a print cooling fan. Use these part libraries

File:5015blower.fcstd
Nema 17 Faceplate sketch - File:Nema17face.fcstd
Marcin's Titan Aero sensor holder - File:Titanaeromarcin.fcstd - not finished. Finished - File:Titanaeromarcin.stl
To this, add a fan mount for a print cooling fan - File:Fanwithholderpattern.fcstd
Aleph Objects has produced a FreeCAD version of the Titan Aero extruder - [1]. See Mirrored_aero_assem.fcstd file. Note this is not what we use, but a mirror image - there are 2 versions of the Titan Aero.

Download in FreeCAD format - [7]

[1] D3D Extruder Holder. File:Motor interface.fcstd , File:Motor interface.stl

@@ Line 7: / Line 7: @@
 *To this, add a fan mount for a print cooling fan - [[File:fanwithholderpattern.fcstd]]
 *[[File:titanwithblower.png|500px]]
-*Aleph Objects has produced a FreeCAD version of the Titan Aero extruder -  [http://devel.lulzbot.com/TAZ/accessories/angelfish/AERO_STEP_FILES/]. See Mirrored_aero_assem.fcstd file
+*Aleph Objects has produced a FreeCAD version of the Titan Aero extruder -  [http://devel.lulzbot.com/TAZ/accessories/angelfish/AERO_STEP_FILES/]. See Mirrored_aero_assem.fcstd file. Note this is not what we use, but a mirror image - there are 2 versions of the Titan Aero.