Revision as of 00:06, 13 November 2018

Working Doc

Adding a print cooling fan. Use these part libraries

8 mm sensor. Download - File:8mmsensor.fcstd
[1] D3D Extruder Holder. File:Motor interface.fcstd , File:Motor interface.stl
File:5015blower.fcstd 5015 Blower
File:Nema17face.fcstd Nema 17 Faceplate sketch
File:Titanaeromarcin.fcstd Marcin's Titan Aero sensor holder - not finished. Finished STL - File:Titanaeromarcin.stl
File:Fanwithholderpattern.fcstd Fan mount for a print cooling fan
Titan Aero with blower. Download in FreeCAD format - [1]
[2] Alleph Objects FreeCAD version of the Titan Aero extruder.See Mirrored_aero_assem.fcstd file. Note this is not what we use, but a mirror image - there are 2 versions of the Titan Aero.
Extruder bottom mount by Polemidis - [D3D_Mini_Sub-Assembly_Extruder_Bottom_Mount.fcstd]]

Download in FreeCAD format - [8]

@@ Line 20: / Line 20: @@
 File:titanwithblower.png| Titan Aero with blower. Download in FreeCAD format - [https://github.com/OpenSourceEcology/3D-Printer-Part-Library/blob/master/holder%20%2B%20motor%20%2B%20Titan.fcstd]
 File:Titanearo.jpg||[http://devel.lulzbot.com/TAZ/accessories/angelfish/AERO_STEP_FILES/] Alleph Objects FreeCAD version of the Titan Aero extruder.See Mirrored_aero_assem.fcstd file. Note this is not what we use, but a mirror image - there are 2 versions of the Titan Aero.
+File:check.png|Extruder bottom mount by Polemidis - [D3D_Mini_Sub-Assembly_Extruder_Bottom_Mount.fcstd]]
 </gallery>