User:Dorkmo/Builds/CircularKnitic: Difference between revisions
< User:Dorkmo | Builds
Jump to navigation
Jump to search
| Line 2: | Line 2: | ||
=Build Log= | =Build Log= | ||
===February 10, 2019=== | |||
*Ordred 3D printed parts from 3Dhubs.com | |||
**very little control over print settings | |||
**Possible that parts will have sizing issues without being able to measure between prints | |||
===Febraury 9, 2019=== | ===Febraury 9, 2019=== | ||
| Line 14: | Line 20: | ||
*tweaked variables so that laser cut parts will fit within 380mm width. | *tweaked variables so that laser cut parts will fit within 380mm width. | ||
**This seems to be an industry standard for smaller plastic stock sheets? | **This seems to be an industry standard for smaller plastic stock sheets? | ||
===December 2018=== | |||
*Got design in working order, begin cleaning up issues/bugs | |||
===November 2018=== | |||
*Contacted Mar from CirularKnitic | |||
*Retstarted design work | |||
===May 27, 2018=== | ===May 27, 2018=== | ||
Revision as of 01:40, 16 February 2019
Attempting to build a OSE CircularKnitic v18.03 machine. Updating the design files along the way.
Build Log
February 10, 2019
- Ordred 3D printed parts from 3Dhubs.com
- very little control over print settings
- Possible that parts will have sizing issues without being able to measure between prints
Febraury 9, 2019
- ordered laser cut parts from Sculpteo.com
- Their maximum thickness available is 1/8" or ~3.175mm.
- This is thinner than the original machine's 5mm and 6mm parts
- Taking a chance and hoping this wont be a problem structurally
January 2019
- tweaked variables so that laser cut parts will fit within 380mm width.
- This seems to be an industry standard for smaller plastic stock sheets?
December 2018
- Got design in working order, begin cleaning up issues/bugs
November 2018
- Contacted Mar from CirularKnitic
- Retstarted design work
May 27, 2018
- going to make the outside diameter for p3 about 1,000mm so that it will fit within 4 feet.
- The "Mountain" part didnt like being generated for a largr diameter machine. going to have to go back a tweak a couple things.
- looking at polycarbonate prices, seems steel is almost the same price per volume.
- will probably be easier to find a steel plate laser cutter machine shop
- thinking im going to use steel where they used polycarbonate sheets.
May 22, 2018
- getting close to finishing up variable formulas that need to be calculated based on needle dimensions
- part3 "p3" rendering incorrectly.
- diameter not expanding to accomidate more needles
May 1, 2018
- Recieved needles in the mail
- used digital calipers to take measurements
- Documented here OSE_CircularKnitic_v18.03#CKneedleVars-KH260.scad
April 2018
ordered some needles from this hong kong website http://shop.sckmcl.com.hk/product_info.php?products_id=136
- KH260 for Brother Knitting Machine Main Bed Needles 413426001
- might try using 360 needles. sounds like a nice number to shoot for.