D3D Print Quality Requirements: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 9: | Line 9: | ||
*3D Printed part boxer app - adding packaging to prints for 3D space printing for production purposes. | *3D Printed part boxer app - adding packaging to prints for 3D space printing for production purposes. | ||
*Fastest rubber printer on the market in the <$10k category | *Fastest rubber printer on the market in the <$10k category | ||
=Thermal Performance= | |||
*Includes a heated chamber for printing in up to 200C temperature, which is higher than 3D printer below the $50k mark | |||
*See [[High Temperature Heated Enclosure]] | |||
=Maintenance= | =Maintenance= | ||
Revision as of 19:34, 25 February 2019
- 3 sigma quality on brimless print start
- Turbo fan for horizontal printing
- 100 mm/sec 60 Shore A rubber printing speed
- 10 lb per day print rate per extruder
- Bumper part harvester with vertical printing.
- Active bed cooling for rapid part release
- Mixing extruder print head for multiple material printing and material transition
- 4 sigma quality control on mass production printing with auto part harvest
- 3D Printed part boxer app - adding packaging to prints for 3D space printing for production purposes.
- Fastest rubber printer on the market in the <$10k category
Thermal Performance
- Includes a heated chamber for printing in up to 200C temperature, which is higher than 3D printer below the $50k mark
- See High Temperature Heated Enclosure
Maintenance
- Filament drive is accessible for cleaning
Product Ecology
- Extruder head has wire connectors so other heads can be connected in a construction set approach