100 Km Fiber Link Design: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
Line 7: Line 7:


=Notes=
=Notes=
*First beer optic mode is installed at home location. [https://www.highspeedinternet.com/resources/what-you-need-to-install-fiber-optic-internet/]
*Optical modem is installed at home location to take fiber and convert it to copper [https://www.highspeedinternet.com/resources/what-you-need-to-install-fiber-optic-internet/]
*Can optical fiber be used to connect to an optical modem?
*Can optical fiber be used to connect to an optical modem? I, are there modems that allow fiber to fiber connection?

Revision as of 16:02, 20 March 2019

Here is a reference design for building a fber optic data connection between 2 points using available equipment, and costs involved. We start with components, then materials and equipment BOM.

  • Boring and trenching - directional boring machine and trenchers. Boring machine for going under roads and crossings. Trenching fr straight through distances.
  • Fiber optic cable
  • Splices
  • Cable splicer device
  • Modem on each side

Notes

  • Optical modem is installed at home location to take fiber and convert it to copper [1]
  • Can optical fiber be used to connect to an optical modem? I, are there modems that allow fiber to fiber connection?
Retrieved from "https://wiki.opensourceecology.org/index.php?title=100_Km_Fiber_Link_Design&oldid=188075"