D3D Performance Log: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 1: | Line 1: | ||
See also [[3D Printer Data Collection]] | |||
=Thu Mar 30, 2017= | =Thu Mar 30, 2017= | ||
*The geometry shown below matches the control code configuration of D3D - with dual Y axis configured by running from the second extruder driver. | *The geometry shown below matches the control code configuration of D3D - with dual Y axis configured by running from the second extruder driver. | ||
Latest revision as of 19:45, 8 May 2019
See also 3D Printer Data Collection
Thu Mar 30, 2017
- The geometry shown below matches the control code configuration of D3D - with dual Y axis configured by running from the second extruder driver.
- Note that Y axis will be reversed if the plugs are reversed. No need to correct direction in code - just turn off machine and switch the y stepper driver plugs.
- Note that the extruder motor had to be rewired (switch middle 2 wires)