COVID Log: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 10: | Line 10: | ||
**Identify bulk source of low cost visor material (10 cents a sheet) | **Identify bulk source of low cost visor material (10 cents a sheet) | ||
Otherwise, 3d print a hollow, square rubber gasket in lieu of weatherstrip, with 2x2x20 cm hollow simulated square tube for the - [[File:facemaskgasket.stl]] | Otherwise, 3d print a hollow, square rubber gasket in lieu of weatherstrip, with 2x2x20 cm hollow simulated square tube for the - [[File:facemaskgasket.stl]]. 25 grams - [[File:facemaskgasket.png|300px]] | ||
Revision as of 23:19, 25 March 2020
Wed Mar 25, 2020
Current action points:
- At Open Source Respirator - take best 3D printed candidate - but it requires 3 optimization:
- Supply-chain disruption-safe filter material source in bulk, minimum supply of 1000 or so
- good seal between edges of mask and face
- Undisruptable supply of TPU filament for distributed production - need to start making it from pellets
- at Open Source Face Shield - identify the 1-minute build, 25 cent option:
- Weather strip (Isaac model) with glued-on visor.
- Identify bulk source of weatherstrip (10 cents a strip)
- Identify bulk source of low cost visor material (10 cents a sheet)
Otherwise, 3d print a hollow, square rubber gasket in lieu of weatherstrip, with 2x2x20 cm hollow simulated square tube for the - File:Facemaskgasket.stl. 25 grams - 