COVID Log: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 4: | Line 4: | ||
**Supply-chain disruption-safe filter material source in bulk, minimum supply of 1000 or so | **Supply-chain disruption-safe filter material source in bulk, minimum supply of 1000 or so | ||
**good seal between edges of mask and face | **good seal between edges of mask and face | ||
**Undisruptable supply of TPU filament for distributed production - need to start making it from pellets | **Undisruptable supply of TPU filament for distributed production - need to start making it from pellets. It's expected that we have a PLA or PETg mask with rubber gasket, or entire mask of rubber for good fit. PETg + rubber is good for cleanability + fit. | ||
*at [[Open Source Face Shield]] - identify the 1-minute build, 25 cent option: | *at [[Open Source Face Shield]] - identify the 1-minute build, 25 cent option: | ||
**Weather strip (Isaac model) with glued-on visor. | **Weather strip (Isaac model) with glued-on visor. | ||
Revision as of 23:22, 25 March 2020
Wed Mar 25, 2020
Current action points:
- At Open Source Respirator - take best 3D printed candidate - but it requires 3 optimization:
- Supply-chain disruption-safe filter material source in bulk, minimum supply of 1000 or so
- good seal between edges of mask and face
- Undisruptable supply of TPU filament for distributed production - need to start making it from pellets. It's expected that we have a PLA or PETg mask with rubber gasket, or entire mask of rubber for good fit. PETg + rubber is good for cleanability + fit.
- at Open Source Face Shield - identify the 1-minute build, 25 cent option:
- Weather strip (Isaac model) with glued-on visor.
- Identify bulk source of weatherstrip (10 cents a strip)
- Identify bulk source of low cost visor material (10 cents a sheet)
Otherwise, 3d print a hollow, square rubber gasket in lieu of weatherstrip, with 2x2x20 cm hollow simulated square tube for the - File:Facemaskgasket.stl. 25 grams - 