Open Source Pneumatic Trubine: Difference between revisions

Latest revision as of 15:20, 16 May 2020

Redirect to:

@@ Line 1: / Line 1: @@
-=Basics=
+#REDIRECT [[Open Source Pneumatic Turbine]]
-- A turbine that uses high pressure air to produce rotary motion
-- Can be medium to large scale (the [[Open Source Tesla Turbine]], or the [[Steam Engine]] would better suit smaller installations)
-=Used For=
-- Medium to Large Scale Power Generators
-- Large Vehicles
-=Industy Standards=
--
-=Existing Open Source Designs=
--
-=Minimum Viable Product=
-- Scalable from medium size (larger backyard generators, to commercial generators) to large/super large size (Industrial Grade, Power Plant Grade, or Ship/Submarine Size)
-- Made using the [[Open Source Digital Fabrication Construction Set]], and/or the [[Open Source Metallurgy Construction Set]]
-- As optimized as possible
-=Basic Design=
-==Enclosure==
-- It holds everything together, and also provides the input and output ports
-==Turbine==
-- This converts the movment of the working fluid (air) into rotary motion
-==Axle==
-- This converts the movement of the turbine into rotarty motion
-==Universal Attachment Port==
-- This allows for easy attachment to the axle
-==Flywheel==
-- Provides a bit more stability in the movement of the turbine
-==Gearbox==
-- An optional gear reduction box (most likely using planetary gears) to give it more torque
-=BOM=
--
-=See Also=
--
-=Useful Links=
-- [[https://en.wikipedia.org/wiki/Pneumatic_motor Wikipedia Page on Pnuematic Turbines]]