Seed Home 2 Planning

Based on Seed Home 2 Critical Path:

edit

Strategy

Welding

Basic parameters:

• Professional weld shops charge $60-75/hr around Missouri. That is scalable and replicable, but redundant in terms of paying overhead when we have onsite facilities.
• One can hire someone. Welders get paid $18-27 (mean, top 10%) in Missouri. This is a cost-effective route compared to hiring a fab shop, if one has their own equipment.
• Thus, with OSE design, designs can be fabricated.
• Welder search - by reference.

Weld Budget

• time of 40 hours for LifeTrac can thus cost between $720 and $1080, as opposed to $2400 for the outsource to a fab shop. From here, take $20/hr.
• 7 hours for a set of piers @15 minutes each - $140 for welding.
• Pile Driver - 8 hrs - $160
• MicroTrac - 40 hours of welding - $800
• Baler - 40 hrs - $800
• Rake - 8 hrs - $160.

Design

• OSE module-based design is most effective.
• Execution for CNC machines requires 3D printing, best done with D3D Pro 3 for larger prints.
• Thus, design the following things:
  • Tractor - bobcat style life LifeTrac v17.10
  • 3x geardown for OSE Universal Rotor with pile-driving attachment. Geardown can also be used for tractor drive.
  • P2 pile - up to 10'
  • Microtrac - with mower, tiller, small round baler, rake, and cutter. Decrease track width possibly to 8" on both LifeTrac and MicroTrac.
  • Mower - Rotary Disk Mower.
  • Rake -
  • Baler - simple
  • Brushhog

• • Diesel power cube