Open Source Helical Piers Industry Standards: Difference between revisions
Jump to navigation
Jump to search
| Line 7: | Line 7: | ||
*Standard 2" pipe in [[Pipe Chart]] is 0,154" | *Standard 2" pipe in [[Pipe Chart]] is 0,154" | ||
*According to [https://www.technometalpost.com/en-US/professionals/selection-table/] P2 is for 1-story residential, and P3 is for 2-story. | *According to [https://www.technometalpost.com/en-US/professionals/selection-table/] P2 is for 1-story residential, and P3 is for 2-story. | ||
=Sample Installation Specification= | |||
*RamJack specification for contractors - [https://www.ramjack.com/documents/Helical-Pile-System-PDFs/Helical-Pile-Spec-Rev-3-15.pdf] | |||
Revision as of 23:17, 16 September 2020
Industry Standards
- P2 pier specifications -
- According to [1] - 11,000 lb max compression.
- The P2 pile is an industry standard for residential construction, compressive strength limit of 9600 lb -
. It is merely standard 2" galvanized pipe. - Pile sizes chart - [2]
- Note the wall thickness can be 0.154 or 0.19
- Standard 2" pipe in Pipe Chart is 0,154"
- According to [3] P2 is for 1-story residential, and P3 is for 2-story.
Sample Installation Specification
- RamJack specification for contractors - [4]