Custom Fabrication Exam: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
These are basic competency requirements for fabrication at Factor e Farm: | These are basic competency requirements for fabrication at Factor e Farm: | ||
Welding test on mild steel: | MIG Welding test on mild steel: | ||
#Weld two 1/8" steel flats at right angles to a tee post over 6' length | #Weld two 1/8" steel flats at right angles to a tee post over 6' length | ||
| Line 7: | Line 7: | ||
#welding two 1" slabs together, butted to each other flat along a 6" length | #welding two 1" slabs together, butted to each other flat along a 6" length | ||
Torching test on mild steel: | Oxyacetylene Torching test on mild steel: | ||
#Torching 1/8" steel over 12 inches length | #Torching 1/8" steel over 12 inches length | ||
| Line 17: | Line 17: | ||
[[Category:Standards]] | [[Category:Standards]] | ||
[[Category:Distributive Enterprise]] | |||
Latest revision as of 04:12, 5 May 2011
These are basic competency requirements for fabrication at Factor e Farm:
MIG Welding test on mild steel:
- Weld two 1/8" steel flats at right angles to a tee post over 6' length
- Welding two 1/4 slabs together at right angle to make an angle for 6" length
- welding two 1" slabs together, butted to each other flat along a 6" length
Oxyacetylene Torching test on mild steel:
- Torching 1/8" steel over 12 inches length
- Torching a 1" slab, over 12 inch length
You may submit a video for approval.
General body awareness, self-awareness, and safety awareness are required. These are difficult to teach - they are a mindset that the participant needs to be equipped with prior to becoming involved in the workshop.