Bearing designation

To identify a bearing, it’s assigned a standardized code referred to as a designation. The designation is made up of one to three parts;

• Prefix
• Basic designation
• Suffix

Prefixes and suffixes, which provide additional information to the designation, are not always included.

The meaning of the numbers and letters that can be included in a designation is listed in the section Code tables.

Basic designation

A basic designation contains 3-5 digits that always represent these three pieces of information:

• Bearing type,
• Bearing series, and
• Bore size (inner diameter).

Note: the Bearing type and Bearing series put together is called Bearing series.

Let’s take the following three designations as examples

• 626 (3 digit designation)
• 6305 (4 digit designation)
• 62103 (5 digit designation)

626

• The first digit always tells us the Bearing type (6 = Single row deep ball groove bearing.)
• The second digit (2) tells us the Dimension series (2 = Light).
• In a three digit designation, the third digit (6) tells us the Bore size in mm. So in this case, the Bore diameter is 6 mm.

6305

• Again, the first digit tells us the Bearing Type (6 = Single row deep ball groove bearing.)
• The second digit (3) tells us the Bearing series (3 = Medium.)
• The third and fourth digit (05) tells us the Bore size (05 = 25 mm.)

62103

• First digit for Bearing type as always.
• The second and third digit tells us the Dimension series where
  • the second digit (2) is the width code and
  • the third digit (1) is the diameter series
• The fourth and fifth digits (03) tells us the bearing Bore size (03 = 17 mm.)

Prefixes and suffixes

A bearing code can also be made longer to include additional information such as;

• Shield code
• Contact angle code
• Matched pair or stack code
• Internal design code
• External configuration code
• Bearing ring shape code
• Internal clearance code
• Tolerance class code

Codes and their meanings are listed in the section Code tables.

Additional designation examples

Here are some examples what bearing designations can look like. (What the codes mean is shown under section Code tables below. 6305ZZ

Code tables

Prefix codes

Prefix Code	Meaning
K	Cage with roller elements
L	Removable bearing ring
R	Ring with roller set
S	Roll body of stainless steel
W	Stainless steel deep groove ball bearing
H, LM	Tapered Roller Bearings-Inch
HJ, IR	Needle Roller Bearings-Inchstvle
K	Needle Roller Bearings-Metric
N, NJ, NU, NUP	Cvlindrical Roller Bearings-Metric
NA, NAO	Needle Roller Bearings with Inner Rings-Metric
NK, RNA	Needle Roller Bearings without Inner Rinos-Metric
NN	Super Precision Cylindrical Roller Bearings

Bearing type codes

Bearing type code	Meaning
1	Self aligning Ball Bearing
2	Spherical Roller Bearing
3	Double row Angular contact Ball bearing
4	Double row Ball Bearing
5	Thrust Ball bearing
6	Single row deep groove ball bearing
7	Single row angular contact bearing
8	Felt sealbearing
32 / T	Tapered Roller Bearing
R	Inch Bearing
N	Cylindrical roller bearing
NN	Double row roller bearing
NA	Needle roller bearing
BK	Needle roller bearing with closed end (Drawncup)
HK	Needle roller bearing with openends (Drawncup)
C	GARB roller bearings
K	Needle roller and cage thrust assembly
QJ	Four-point contact ball bearings
BH	Angular cont-act (15°)
BIH	Angular contact (15°)inch series
BA	Angular contact (25° or 29°)
BT	Angular contact (35"-40")
BY	Angular contact (35°-40")
BO	Angular contact, double row, radial, non- filling slot
BZ	Angular contact,split inner ring
BE	Bell bearin& double row,angular contact,filling slot (maximum capacity)
BG	Ball bearing, double row, angular contact,non-filling slot
BF	Ball bearing,double row, radial,fill ng slot (maximum capacity)
BK	Ball bearing, double row, radial,non-filling slot
BM	Ball bearing, single row separable
8L	Ball bearing, single row, radial,filling slot (maximum capacity)
BC	Ball bearing, single row, radial,non-filling slot (Conrad)
BIC	Bell bearing, single row, radial,non-filling slot,inch series (Conrad)
BS	Self-aligning ball bearing
R	Cylindrical roller
S	Self-aligning spherical roller
T	Thrust ball or roller

Dimension series codes

Dimension series code	Meaning
0	Extra light
1	Extra light thrust
2	Light
3	Medium
4	Heavy
8	Extra thin section
9	Very thin section

Bore size codes

From code 04 and onward, the code multiplied by 5 equals the bore size in millimeters;

04x5 = 20 mm,

05x5 = 25 mm,

06x5 = 30 mm and so on.

Bore size code	Bore size in millimeters
00	10
01	12
02	15
03	17
04	20
05	25
06	30
07	35
08	40
09	45

Shielding or sealing code

Shielding orsealing code	Meaning
Code	Description
z	One side shielded
zz	Both sides shielded
RS	One side sealed
2RS	Both sides sealed
v	One side non contact seal
vv	Both sides non contact seal
DDU	Both sides contact seals
NR	Snap ring and groove
M	Brass cage

Angular contact codes

Angular contact code for ball bearings	Meaning
A	30°
AC	25°
B	40°
C	15°
CA	20°
E	35°

Angular contact code for Tapered roller bearings	Meaning
B	Less than 17°
C	20°
D	28° 30'
DJ	28° 48' 39"

Internal clearance codes

Internal Clearance code	Meaning
C2	: Tight
C0	: Normal
C3	: Loose
C4	: Extra Loose

Conditions when the machine is in operation	Examples	Optimal internal bearing clearance in C code
Significant shaft deflection	Semi-floating wheel bearings in cars	C5 or equivalent
Steam flow through hollow shaft or pressure rods exposed to high temperatures	The drying part of paper machines;	C3, C4;
	Transport rollers in rolling mills	C3
High impact loads and vibrations or both the inner and outer ring have a press fit	Traction engines for trains	C4;
	Vibrating sieves	C3, C4;
	Hydraulic connector	C4;
	Gearboxes for tractors	C4;
Loose fitting inner and outer rings	Rolling pins for rolling mills	C2 or similar
Low noise and no vibrations	Small motors with special features	C1, C2, CM
Setting to prevent significant shaft deflection	Main spindle of lathes	CC9, CC1

Cage type codes

Cage type code	Meaning
x	Manufacturer standard bearingcage
A	Steel pressed (land guided)
J	Steel pressed (ball guided)
F	Steelor iron,machined
y	Brass or bronze, pressed
B	Brass or bronze, pressed (land guided)
K	Brass or bronze, machined (land guided)
M	Brass or bronze, machined (ball guided)
H	Light alloy,machined
0	Non-metallic (land guided)
T	Non-metallic (ball guided)
v	Full complement bearingwithout cage

Internal links

Bearing selection