Inspection Schedule

Sequence

• The rough inspection should be performed before the insulation is installed. This is not stated as a requirement, but a suggestion here. [1]
• Rough-in inspection can also occur after insulation is in, but it may be more difficult to perform inspection. [2]
• Thus - is there a separate inspection for insulation prior to all sheathing?

OSE Case

• No insulation covers any wiring or plumbing work.
• Air test of water supply - leave a test port in water supply for air pressure testing or water pressure testing.
• Smoke detectors are required on the electrical side - [3]

Extreme Inspection Schedules

Some locations may have a large number of inspections, ideally these can occur on the same day if there are multiple similar ones. See [4]. This calls for:

1. Excavation
2. Foundation
3. Underground plumbing
4. Rough plumbing/electrical
5. Framing
6. Insulation/vapor barrier - 2 inspections if foundation has exterior insulation
7. Final plumbing/mechanical
8. Final inspection. All done, street number and landscaping done.

1. Grid connection

Links

• Plumbing Inspection - foundation, rough-in, final
  • Foundation Plumbing Inspection
  • Rough-In Plumbing Inspection
  • Final Plumbing Inspection
• Electrical Inspection
• KC Inspections
• Feedback_on_Inspection_Schedule
• Rough-In Electrical Inspection
• Under Construction Phase Inspections
• Seed Eco-Home Inspection Planning