EPDM: Difference between revisions
Jump to navigation
Jump to search
(→Basics) |
|||
| Line 5: | Line 5: | ||
=Patching= | =Patching= | ||
See video at [https://www.menards.com/main/building-materials/roofing/low-slope-roofing/epdm-rubber-roofing-patch-kit/7-1502552-1/p-1444444063045-c-5821.htm] minute 16:50 | *See video at [https://www.menards.com/main/building-materials/roofing/low-slope-roofing/epdm-rubber-roofing-patch-kit/7-1502552-1/p-1444444063045-c-5821.htm] minute 16:50 | ||
**Apply primer, let dry | **Apply primer, let dry | ||
**Take backing off patch | **Take backing off patch | ||
Latest revision as of 18:45, 2 February 2023
Basics
- A Thermoset Elastomer
- Used Mainly in Roofing/House Membranes, and Rubber Surfacing (no good term for this, but essentially the bound granule surface at playgrounds / "splash parks", can also use Granulated Tires / Thermoplastic Vulcanizates ( TPV ))
Patching
- See video at [1] minute 16:50
- Apply primer, let dry
- Take backing off patch
- Press on, with roller
EPDM Installation Directly Over Insulation
- Yes, it can be done.
- Insulation is glued down to prevent thermal bridging, as opposed to mechanical fasteners
- EPDM is glued to insulation using contact adhesive (solvent), as opposed to latex water-basedglue
- Note that OSB is glued down. Is there mechanical fastening as well?
Internal Links
Installation Video
- https://www.youtube.com/watch?v=kRcM-3kLeOI
- edge detail - https://www.youtube.com/watch?v=gWf0kr27Smg