Latest revision as of 00:15, 8 June 2023

Basics

This page goes over the existing projects, and the potential for an OSE Standard Design for a Peristaltic Pump

For the non-medical applications OSE is interested in, a moderate flow rate is desirable
- ie not miniscule amounts, short of those medical uses, or some Scientific Uses Lab Scale devices etc, not Pilot Plant level stuff)
- This can probably be maximum Flow Rate of 250-1000 mL/Min
Using normal NEMA Stepper Motors is desirable
Using standard Silicone Tubing (or Latex Tubing in applications where that is not an issue) Sizes is a must
Either having the flow directly controlled by an Arduino + Arduino Shield / Breakout Board or even just a Breadboard, a Custom PCB , or having this be an easy future option via some sort of common existing Electrical Connector / port is a must

A Video by the YouTube Channel "Great Scott!" Titled "Peristaltic Pump || DIY or Buy" ( ~8 Minute Watch Time )
The Project's Instructable Page
- They based the design of their 3D Printed Parts on an EOSD on Thingiverse by a User Called "Ralf" Titled "Low cost peristaltic pump"
- They post the 3D Printed Parts on both this, and ones modified for the NEMA 17 Stepper Motor they used, rather than the Brushed DC Motor originally used, on the instructable page itself as well
- They also post their Control Electronics Design Which Uses:
  - 1x Arduino Nano
    - 1x NEMA 17 Stepper Motor
    - 1x DRV8825 Stepper Motor Driver
    - 1x 10kΩ Potentiometer
    - 1x 100µF Capacitor

@@ Line 30: / Line 30: @@
 =External Links=
-*
+*[https://openbuilds.com/builds/peristaltic-pumps-automatic-cocktail-mixer.8444/ An [[OpenBuilds]] Build by "HuguesP" Titled "Peristaltic pumps, Automatic Cocktail mixer" / "Barbot 0.1" ]
+**[https://www.youtube.com/watch?v=fX-ULy5OF1o A Video by the YouTube Channel "Hugues Prescott" Titled "Barbot 0.1, DIY Automatic Cocktail Mixer." ]