Mount Cylinders: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
Start with bottom cylinder | Start with bottom cylinder mount assembly: | ||
*[1] Cut 1/2"X6"x12" plate | *[1] Cut 1/2"X6"x12" plate | ||
*[2] Cut 1/2"x4"x6" plate | *[2] Cut 1/2"x4"x6" plate | ||
*Mag drill or punch [4] 3/4" holes in 6"x12" plate | *Mag drill or punch [4] 3/4" holes in 6"x12" plate for attachment of main cylinder to frame | ||
*Mag drill or punch [2] 1" pin holes on each 4"x6" plate | *Mag drill or punch [2] 1" pin holes on each 4"x6" plate for attachment of main cylinder | ||
*Weld 1" drilled out nut onto 4"x6" plates | *Weld a reinforcing gusset nut - 1" drilled out nut onto 4"x6" plates | ||
*Tack [2] plates about 3.5" apart for cylinder mounting | *Tack [2] plates about 3.5" apart for cylinder mounting | ||
*Weld assembly together with cylinder pin in place (prevents shifting) | *Weld assembly together with cylinder pin in place (prevents shifting) | ||
Move to top of main cylinder, which is also the mount for the secondary cylinder | |||
*[2] Cut 6”x12” plate | |||
*Declare 4 hole locations for mounting to arms | |||
*Drill plates a pair at one time, clamped together – [4] ¾” holes and [2] 1” holes | |||
*Align these plates by inserting the pins into these and clamping to arms prior to transfer punching holes | |||
*Transfer punch hole locations to arms from both sides | |||
*Drill 4 holes for loader arm attachment per each side, one side at a time | |||
*Drilland 2 for pins - per each plate | |||
*Attach main cylinder and secondary cylinder | |||
*Lay assembly in place on frame, and pin bottom of main cylinder into it | *Lay assembly in place on frame, and pin bottom of main cylinder into it | ||
*Pin top of main cylinder into the arm attachment plates | *Pin top of main cylinder into the arm attachment plates | ||
| Line 24: | Line 35: | ||
*Drill bottom mount locations | *Drill bottom mount locations | ||
*Bolt bottom mounts | *Bolt bottom mounts | ||
Revision as of 04:09, 19 June 2011
Start with bottom cylinder mount assembly:
- [1] Cut 1/2"X6"x12" plate
- [2] Cut 1/2"x4"x6" plate
- Mag drill or punch [4] 3/4" holes in 6"x12" plate for attachment of main cylinder to frame
- Mag drill or punch [2] 1" pin holes on each 4"x6" plate for attachment of main cylinder
- Weld a reinforcing gusset nut - 1" drilled out nut onto 4"x6" plates
- Tack [2] plates about 3.5" apart for cylinder mounting
- Weld assembly together with cylinder pin in place (prevents shifting)
Move to top of main cylinder, which is also the mount for the secondary cylinder
- [2] Cut 6”x12” plate
- Declare 4 hole locations for mounting to arms
- Drill plates a pair at one time, clamped together – [4] ¾” holes and [2] 1” holes
- Align these plates by inserting the pins into these and clamping to arms prior to transfer punching holes
- Transfer punch hole locations to arms from both sides
- Drill 4 holes for loader arm attachment per each side, one side at a time
- Drilland 2 for pins - per each plate
- Attach main cylinder and secondary cylinder
- Lay assembly in place on frame, and pin bottom of main cylinder into it
- Pin top of main cylinder into the arm attachment plates
- Pin bottom of secondary cylinder to the arm attachment plates
- Pin top of secondary cylinder to the QA Plate mounts
- Drill cylinder mount plate holes in loader arms
- Mount cylinder plates (2 per arm)
- With loader arms in place, arrange bottom and top mounts, drill holes
- Attach main cylinder to arms
- With main cylinder attached, finetune location of bottom cylinder mount for equal extension of cylinders
- Drill bottom mount locations
- Bolt bottom mounts