Revision as of 23:28, 22 August 2011

Leg Holders

You will need 14 of these per machine. They are required for Arms - secondary (8), Feet(4), Frame with main cylinder (2)

Torch a 3/4” hole in the center of one of the faces of the tubing; make sure it's large enough for a 3/4” bolt
Weld the nut over the hole, ensuring the nut is level, and the hole is clear. Make sure no spatter goes into the threads by covering the top of the nut.
Thread the bolt into the nut.

@@ Line 1: / Line 1: @@
-Leg Holders:
+=Leg Holders=
+You will need 14 of these per machine. They are required for [[CEB Press/Manufacturing Instructions/Arms - secondary|Arms - secondary]] (8), [[CEB Press/Manufacturing Instructions/Feet|Feet]](4), [[CEB Press/Manufacturing Instructions/Frame with main cylinder|Frame with main cylinder]] (2)
-Tools:
+==Tools Required:==
 *Torch
 *Welder
-Materials:
+==Materials Required:==
-*3/16”x 2 1/2” square steel tubing – 6” long (1)
+*2 1/2” x 2 1/2" x 3/16" square steel tubing – 6” long (1)
 *3/4” nut (1)
 *3/4” x 2” bolt (1)
-Instructions:
+==Fabrication Instructions:==
 #Torch a 3/4” hole in the center of one of the faces of the tubing; make sure it's large enough for a 3/4” bolt<br/>
-#Weld the nut over the hole, ensuring the nut is level, and the hole is clear. Make sure no spatter goes into the threads by covering the top of the nut.<br/>
+#Weld the nut over the hole, ensuring the nut is level, and the hole is clear. Make sure no spatter goes into the threads by covering the top of the nut.
-#Thread the bolt into the nut
+#Thread the bolt into the nut.