LifeTrac IV/Research Development/QA plate: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(Created page with "=Overview= These tasks are to determine what is required to adopt the Bobcat standard for the quick attach (QA) plate. The rational is that there are many existing Bobcat tools e...")
 
Line 4: Line 4:
=Tasks=
=Tasks=
# Get dimensions and critical features of the current Bobcat standard
# Get dimensions and critical features of the current Bobcat standard
## [http://www.skidsteersolutions.com/Will_it_Fit_My_Machine_s/24.htm Rough Dimension]
# Redesign the current QA plate to the Bobcat standard with OSE principles of available manufacturing technologies
# Redesign the current QA plate to the Bobcat standard with OSE principles of available manufacturing technologies
# Determine mating tool tolerance and feature requirements
# Determine mating tool tolerance and feature requirements
# Provide a redesign of the mounting surfaces on the soil pulverizer
# Provide a redesign of the mounting surfaces on the soil pulverizer

Revision as of 15:16, 9 January 2012

Overview

These tasks are to determine what is required to adopt the Bobcat standard for the quick attach (QA) plate. The rational is that there are many existing Bobcat tools existing and it would be useful to be able to utilize them with the LifeTrac without requiring a QA Conversion Plate.

Tasks

  1. Get dimensions and critical features of the current Bobcat standard
    1. Rough Dimension
  2. Redesign the current QA plate to the Bobcat standard with OSE principles of available manufacturing technologies
  3. Determine mating tool tolerance and feature requirements
  4. Provide a redesign of the mounting surfaces on the soil pulverizer