OSE Sample Cuts: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 1: | Line 1: | ||
Sample Cuts in DXF. 1" hole size. Need to resize to 1-1/16" on [[Mike Hill Plasma Table]]. Erase the borders if cutting from 1/2"x8" flats. Pin is 3". DOM used around pin is 3/4" wall, to made overall diameter of hole 4.5" - with about 3/16" allowance for weld-in. Therefore, the overall diameter within the DXF CAM file should be 4.875". | Sample Cuts in DXF generated with free and open [[LibreCAD]]. 1" hole size. Need to resize to 1-1/16" on [[Mike Hill Plasma Table]]. Erase the borders if cutting from 1/2"x8" flats. Pin is 3". DOM used around pin is 3/4" wall, to made overall diameter of hole 4.5" - with about 3/16" allowance for weld-in. Therefore, the overall diameter within the DXF CAM file should be 4.875". | ||
[[Image:DXFsamples.png|600px]] | [[Image:DXFsamples.png|600px]] | ||
Latest revision as of 21:42, 18 May 2013
Sample Cuts in DXF generated with free and open LibreCAD. 1" hole size. Need to resize to 1-1/16" on Mike Hill Plasma Table. Erase the borders if cutting from 1/2"x8" flats. Pin is 3". DOM used around pin is 3/4" wall, to made overall diameter of hole 4.5" - with about 3/16" allowance for weld-in. Therefore, the overall diameter within the DXF CAM file should be 4.875".
Individual Files
Flats bonding plate - 48" length, 1/2"x8" steel stock
Rounded joint plate - 48" length, 1/2"x8" steel stock. Note: image is slightly inaccurate (no Mickey Mouse ears).
Note: in the DXF file, the large holes intersects the small holes, so the overlap lines need to be erased to create Mickey Mouse ears.
4x4x1/4" tubing - 65" long
Real Cuts
