3 Inch Wheel Hub: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 7: | Line 7: | ||
*Start with this for a similar idea, but this is single-split and needs to be attached to a wheel hub.: | *Start with this for a similar idea, but this is single-split and needs to be attached to a wheel hub.: | ||
=Design Rationale 1= | =Design Rationale 1= | ||
| Line 14: | Line 13: | ||
*Weld tabs on it for the 3/4" bolt hole | *Weld tabs on it for the 3/4" bolt hole | ||
*Weld one half of the keyed coupler into the rest of the metal wheel | *Weld one half of the keyed coupler into the rest of the metal wheel | ||
=Samples to Build From= | |||
[[File:3inchhub.png]] | |||
Revision as of 15:20, 15 June 2013
Note: this will be attached to the wheel from Monica Log
- Start with this for a similar idea, but this is single-split and needs to be attached to a wheel hub.:
Design Rationale 1
- Take a very thick keyed coupler - say start with 3" solid coupler, 1/2" keyway
- Slit it in half
- Weld tabs on it for the 3/4" bolt hole
- Weld one half of the keyed coupler into the rest of the metal wheel
Samples to Build From
