The Spark Build

Task Allocation

Pre 3

1. James, Jason, Tom - takenon cube
2. Lucas, Leandra, Cory, Jordan - explosions & procedures
3. Rob Farmer, Dante, Durante- take off old wheel units
4. Nat, Emily, DJ - BOM total + cut lists
5. Marcin + Siku - parts cost total
6. Rob K, Katie - indisposed
7. BOM assessment - what we have and what we need to cut

Main

• List people and allocate tasks

1. James, Jason, Tom - Power Cube
2. Katie, Audrey, Emily, Nat - Abrasive Cutoff cutting
3. Rob Farmer - bolts cutting
4. Rob K+ Ian - shoppin + video
5. Nat -
6. Rob
7. Dante
8. Durante
9. Leandra
10. Lucas
11. Jordan
12. Cory
13. Ian
14. Siku
15. DJ
16. Emily

• Shop setup
• Parts run

Shopping List

• Lock washers
• Bandsaw blade
• Cutoff wheels- 14"

Tasks:

• Take off wheels
• Create cut lists
• Cutting materials
• Take off tracks
• Remove power cube
• Get blocks and stand tractor on blocks
• Shop signs
• Eyewash
• Generate cut list
• Generate procedures
• Build Power Cube
• Workshop inventory
• Tool prep
• Create cannibalization log
• Work instructions
• Graphical work instructions

Quality Control

• Download File:Cab and Loader Arms 12pm Jul 11.skp
• Loader forearm stability
• Force on arm lift cylinder mounting
  • 9 degree cylinder angle means 9400 lbs lift force
• Foot pedal detail
• Valve 1 mounting plate detail
• Valve 2 mounting plate detail
• Foot pedal detail
  • Pin tight with lever
• Seat mounting
• Wheel shaft procedure
• Loader down pressure
• Bolts clearing everywhere
• Bolting feasibility everywhere
• Build order correct for each moduleo
• Bottom cylinder mounting spacer means can't bolt the tubes together as is. Solution: bore out holes or move mounting 4" forward and wheel 4" forward and use a x8" plate for mounting
• 1/2" stickout on wheel me
• Narrower cab by 8" on each side to 32 inch door and 40" wide cab, to save 13' of tubing ($170)

Parts

First Choice

• 3 Spool, 25 gpm Motor Valve for Wheels, auxiliary implements, and turning - [1]. Needs Power Beyond Sleeve - [2]
• 25 GPM Joystick valve - [3]
• [4] hoses - [4]
• [2] hoses - [5]

Other Options

• 25 GPM Joystick valve - [6]
• 45 GPM auxiliary motor valve - [7] - note: motor auxiliary goes before the joystick loader valve.
  • Fittings - SAE 16 in,out,work - need 3 of [8] and 1 of [9]
• 25 GPM auxiliary motor valve - [10]