D3D Inventory

Unpacking

It took 10 hours to unpack 12 Folgertech Prusa i3 printer kits:

1. Separate bolts by size
2. Separate every part by one of 10 Modules as at Prusa i3 Build Optimization

Further Prep

1. Put set screws into L brackets (24 set screws per machine)
2. Separate aluminum beams and unwrap, then tape together into a bunch
3. Take bags off all aluminum bushing blocks
4. Put on jumpers onto controller boards
5. Put on stepper drivers onto controllers
6. Bend up the transistors on stepper drivers
7. Take backing off all plexiglas