MK8 Nozzle

Error creating thumbnail: File missing

Hint: MK8 1.75mm nozzle works with 3 mm filament on the Lulzbot Mini. Even though the hole is <3mm by the threads, melted 3mm filament has no problem going through the nozzle. Great for parts interoperability. Next day 2 of these nozzles clogged on 2 Lulzbot Minis. Don't know if it's improper settings or nozzles aren't robust.

1.75 mm Filament Nozzle for 3D Printer Extruders

• 0.8 mm nozzle aperture
• M6x1 thread
• Source - [1]
• This source [2] worked with Lulzbot Mini Hexagon hot end

Error creating thumbnail: File missing

Can 1.75 and 3mm filament be used in one nozzle?

• This one says yes - [3]

Links

• Volcano Nozzle