CEB Press Part Library

THIS PAGE IS UNDER HEAVY CONSTRUCTION DO NOT REFERENCE

I am creating this doc for the design sprint on Saturday July 22 @10:55 MST as per slide #2 of the sprint document @ [1] - Dixon

Introduction

Conditions of satisfaction for complete CAD for a given project means that we have a complete part library:

• Parts - for building Modules, Sub-assemblies and for producing Fabrication Drawings
• Modules - Made of multiple parts, usually used in Sub-assemblies. Modules are used when there is repeated assembly of same or similar parts (like the legs). These are used for Exploded Part Animations, Language Agnostic Instructionals (LAIs), and other work.
• Sub-assemblies The major components of the final CAD. used for Exploded Part Animations, Language Agnostic Instructionals (LAIs), and other work.
• Final Assembly - The completed build. for Exploded Part Animations, LAIs. Note that the Final Assembly may have to use Simplified Assets in some cases to remain workable
• Simplified Assets: Parts, Modules, Assemblies - these are versions with details removed. Some may be grouped to facilitate handling. In some cases they are drawn from scratch as only abstract, blocky models - to save significantly on file size.
• File Size Requirements - all assets meet File Size Requirements for that particular asset type. Files can't be so large that FreeCAD can't open them or work with them effectively.
• File Organization - Spreadsheet of all Assets (both Simlified and Complete assets) is available.Each Sub-Assembly or Module CAD file includes the parts list diagram
• Construction Best Practices - procedures for effective part building in FreeCAD are followed for each file. Each part should be designed at the origin, so symmetries can assist in the design.
• File Build Documentation - Each file is documented for how to create that file, so novices can get up to speed in making modifications. A short video with voiceover is the best way to document a part build. This is important because this creates design literacy in the general populace.

• ConstraintsAll the modules and Sub-assemblies are constrained without any Degrees Of Freedom.

Hint: Once all the parts here are stable, we will create a FreeCAD CEB Press Workbench which includes a drag-and-drop of every part within FreeCAD

Index

CEB_Press#Master_Index The genealogy needs the addition of the 17.08 version, but the file is protected and cannot be edited

Master File

• http://opensourceecology.org/wiki/File:CEBPressJuneGroup.fcstd older version
• File:CEB 17.08 CAD Assembly.fcstd This is the Final Assembly and most recent updated file.
• File:CEB 17.08 supporting files.zip Includes all the parts, modules and sub-assemblies that are used in the final assembly. If any editing is needed to any parts plz unzip the files to the same directory as the Final Assembly. Update and Save any related modules, sub-assemblies, zip the files and reupload to the wiki. Update, Save and Reupload the Final Assembly as well.

Index:

Embed index

Parts Gallery

Frame Sub-assembly

• 

  Frame Subassembly - size:321kb - FreeCAD -File:CEB 17.08 Frame Subassembly.fcstd

Main Leg

has to be renamed to Main_Leg_Module" and broken down to parts

• Leg_front_plate
• Leg_side_plate
• Leg_rib

• CEB Rib 1.jpg

  File:.pngRib 1 - size:158 kb - FreeCAD -File:CEB Rib 1.fcstd.

• CEB Rib 2.jpg

  File:.pngRib 2 - size:158 kb - FreeCAD -File:CEB Rib 2.FCStd.zip

Bottom Rear

has to be renamed to "Bottom_module" and broken down to parts

• Bottom_Vertical_plate
• Bottom_Horizontal_plate
• Bottom_square

Top Panel Module

• 

  Top Panel Module - size: 166kb - FreeCAD -File:Top Panel Module.fcstd

• Top Front Panel.png

  Top Front Panel - size: *kb - FreeCAD -File:Top Front Panel.fcstd Other File - File:Top Front Panel.dxf

• Top Top Panel.png

  Top Top Panel - size: *kb - FreeCAD -File:Top Top Panel.fcstd Other File - File:Top Top Panel.dxf

• Top Bottom.png

  Top Bottom Panel - size: *kb - FreeCAD -File:Top Bottom Panel.fcstd Other File - File:Top Bottom Panel.dxf

Mid Plates

These have to be made into a "Middle_plates_module"

• 

  Mid Reinforcement Plates - size:12 kb - FreeCAD -File:Mid reinforcement plate.fcstd Other File - File:Mid reinforcement plate.dxf

• 

  fusion11 - size: 18 kb - FreeCAD -File:Fusion11.fcstdOther File - File:Fusion11.dxf

• 

  MidPlates- FreeCAD -File:CEBPress Frame MidPlate update.fcstd Other File - File:CEBPress Frame MidPlate.dxf

Individual Parts

• Chamber Spacer

Arms Sub-assembly

• 

  Arms Subassembly - size:330kb - FreeCAD -File:Freecadfile.fcstd.

Individual parts

• Table 6048
• Table 6049

Drawer Sub-assembly

• 

  Drawer Full Module - size:138kb - FreeCAD - File:CEB brick pess v17.8 drawer.FCStd

• 

  Drawer Top - size:9kb - FreeCAD - File:CEB Press v17.08 drawer top.FCStd

• 

  Drawer Side - size:-kb - FreeCAD - File:CEB Press Drawer Side.fcstd

Rod Holder Module

• File:Rod holder.fcstd , File:Rod holder.stl

Invividual parts

• Drawer_top
• Drawer_side
• 6270
• Drawer_bottom_6259
• Drawer_compression_plate
• 6264
• 6265
• 6266
• Drawer_rod_attach_bar

Hopper seat Sub-assembly

• Lorem Ipsum.jpg

  Lorem Ipsum - size:null - FreeCAD -File:Freecadfile.fcstd. Other File - File:*.*

Individual parts

• 6064
• 6065
• 6067
• 6068

Hopper

• Lorem Ipsum.jpg

  Lorem Ipsum - size:null - FreeCAD -File:Freecadfile.fcstd. Other File - File:*.*

Individual Parts

• Hinge

Crate Sub-assembly

• Lorem Ipsum.jpg

  Lorem Ipsum - size:null - FreeCAD -File:Freecadfile.fcstd. Other File - File:*.*

Individual Parts

• 6600_deflector
• 6602_deflector

Cylinder Sub-assembly

• Lorem Ipsum.jpg

  Lorem Ipsum - size:null - FreeCAD -File:Freecadfile.fcstd. Other File - File:*.*

Individual Parts

• Main_Cylinder
• 6333
• 6334
• 6335
• 6336
• 6325_pin
• bushing

Secondary Cylinder Sub-assembly

• Lorem Ipsum.jpg

  Lorem Ipsum - size:null - FreeCAD -File:Freecadfile.fcstd. Other File - File:*.*

Individual Parts

• Secondary_cylinder
• secondary_cylinder_pin

Final Assembly Gallery

• Lorem Ipsum.jpg

  Lorem Ipsum - size:null - FreeCAD -File:Freecadfile.fcstd. Other File - File:*.*