CEB Press Part Library

From Open Source Ecology
Jump to navigation Jump to search

THIS PAGE IS UNDER HEAVY CONSTRUCTION DO NOT REFERENCE

I am creating this doc for the design sprint on Saturday July 22 @10:55 MST as per slide #2 of the sprint document @ [1] - Dixon

Ceb2016.jpg

Introduction

Conditions of satisfaction for complete CAD for a given project means that we have a complete part library:

  • Parts - for building Modules, Sub-assemblies and for producing Fabrication Drawings
  • Modules - Made of multiple parts, usually used in Sub-assemblies. Modules are used when there is repeated assembly of same or similar parts (like the legs). These are used for Exploded Part Animations, Language Agnostic Instructionals (LAIs), and other work.
  • Sub-assemblies The major components of the final CAD. used for Exploded Part Animations, Language Agnostic Instructionals (LAIs), and other work.
  • Final Assembly - The completed build. for Exploded Part Animations, LAIs. Note that the Final Assembly may have to use Simplified Assets in some cases to remain workable
  • Simplified Assets: Parts, Modules, Assemblies - these are versions with details removed. Some may be grouped to facilitate handling. In some cases they are drawn from scratch as only abstract, blocky models - to save significantly on file size.
  • File Size Requirements - all assets meet File Size Requirements for that particular asset type. Files can't be so large that FreeCAD can't open them or work with them effectively.
  • File Organization - Spreadsheet of all Assets (both Simlified and Complete assets) is available.Each Sub-Assembly or Module CAD file includes the parts list diagram
  • Construction Best Practices - procedures for effective part building in FreeCAD are followed for each file. Each part should be designed at the origin, so symmetries can assist in the design.
  • File Build Documentation - Each file is documented for how to create that file, so novices can get up to speed in making modifications. A short video with voiceover is the best way to document a part build. This is important because this creates design literacy in the general populace.
  • ConstraintsAll the modules and Sub-assemblies are constrained without any Degrees Of Freedom.


HintLightbulb.png Hint: Once all the parts here are stable, we will create a FreeCAD CEB Press Workbench which allows for parametric modification for different sizes of the machine.

Index

CEB_Press#Master_Index The genealogy needs the addition of the 17.08 version, but the file is protected and cannot be edited

Master File

Index:

Embed index

Parts Gallery

Frame Sub-assembly

Main Leg Module

Has to be broken down to individual parts

  • Leg_front_plate
  • Leg_side_plate
  • Leg_rib

Bottom Rear

has to be renamed to "Bottom_module" and broken down to parts

  • Bottom_Vertical_plate
  • Bottom_Horizontal_plate
  • Bottom_square

Top Panel Module


Mid Plates

These have to be made into a "Middle_plates_module"

Individual Parts

  • Chamber Spacer

Arms Sub-assembly

Arm 1 Module

Arm 2 Module

Arm 3 Module

Arm 4 Module

Leg Module

Individual parts

  • Table 6048
  • Table 6049

Drawer Sub-assembly

Rod Holder Module

Invividual parts

  • Drawer_top
  • Drawer_side
  • 6270
  • Drawer_bottom_6259
  • Drawer_compression_plate
  • 6264
  • 6265
  • 6266
  • Drawer_rod_attach_bar

Hopper seat Sub-assembly

Individual parts

  • 6064
  • 6065
  • 6067
  • 6068

Hopper

Hopper_support_mount_module

Hopper_support_long

Hopper_support_short

Hopper_seat_module

Individual Parts

  • Hinge

Grate Sub-assembly

Grate_frame_module

Grate_back_support_module

Grate_square_tub_support_module

Individual Parts

  • 6600_deflector
  • 6602_deflector

Cylinder Sub-assembly

Individual Parts

  • Main_Cylinder
  • 6333
  • 6334
  • 6335
  • 6336
  • 6325_pin
  • bushing

Secondary Cylinder Sub-assembly

Individual Parts

  • Secondary_cylinder
  • secondary_cylinder_pin


Final Assembly Gallery

Retrieved from "https://wiki.opensourceecology.org/index.php?title=CEB_Press_Part_Library&oldid=156911"