Cura

From Open Source Ecology

Revision as of 01:26, 26 March 2019 by Marcin (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Cura Tutorial

See good one from https://all3dp.com/1/cura-tutorial-software-slicer-cura-3d/

Links

Lulzbot Cura is the Lulzbot edition of Ultimaker's Cura. See Lulzbot Cura. OSE is using Lulzbot Cura because Lulzbot is a libre hardware company, while Ulimaker hardware is not open source.

Note that Ultimaker Cura has some extra settings that may be desirable at times. See Cura Tutorial above

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cura&oldid=188395"