E3D Titan Aero Extruder

edit

Introduction

An open source extruder for regular and flexible filaments that can also be used with the Volcano heater block + nozzle for printing with volcano 0.6 mm to 1.2 mm nozzles.

Build Instructions

• https://e3d-online.dozuki.com/Guide/Titan+Aero+Assembly/23?lang=en

Bugs

• Grub screw on pinion gear interferes with the second gear because the grub screw is not recessed. This requires more precise mounting of the pinion gear, and disallows usage of the extruder without a mount plate. A 2 mm spacer is needed for use with the standard D3D Extruder Holder.

Titan Extruder (not aero)

• https://e3d-online.com/titan-extruder - Is there any advantage of Aero to the Titan?

Titan Aqua

• Liquid Cooled for warm and heated chambers - [1]

Moarstruder

• 100 g/hr flow rate - [2]

Shopping

• Titan Aero 3mm - $120 on Ebay - [3]
• Aliexpress - $67 - [4]
• Volcano Hot End + Nozzle - [5]

CAD

• Aleph Objects has produced a FreeCAD version of the Titan Aero extruder - [6]. See Mirrored_aero_assem.fcstd file