D3D v18.06
Jump to navigation
Jump to search
Development Template
Burndown
Software Notes
Arduino Libraries
- Import LCD library - OSE_Marlin_and_Github#Import_any_necessary_libraries
Arduino Environment
- Use Arduino Environment 1.6.8 - preloaded with OSE Linux v1.0, or download from Arduino Previous Releases
Cura
- Control can be done from the Reprap Discount Full Graphic Smart Controller LCD or from OSE Lulzbot Cura
Arduino Uploads
- Uploading to Arduino can be tricky.
- First, select the right board
- Second, select the right port
- Possible errors: permission denied while using OSE Linux. This should not happen by default. Let's check if other linux has this issue.
avrdude: ser_open(): can't open device "/dev/ttyUSB0": Permission denied ioctl("TIOCMGET"): Inappropriate ioctl for device ioctl("TIOCMGET"): Inappropriate ioctl for device avrdude: ser_send(): write error: Bad file descriptor Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.
Build
Hint: Click on Facebook post, then navigate to the OSE Workshops FB Page to access pictures of 47 steps from the original posting