3D Printer Extruder
Jump to navigation
Jump to search
Working Doc
Print Cooling Fan
Adding a print cooling fan. Use these part libraries
Part Library
8 mm sensor. Download - File:8mmsensor.fcstd
![[1] D3D Extruder Holder. File:Motor interface.fcstd , File:Motor interface.stl](/images/thumb/2/2e/Extruderholder.jpg/120px-Extruderholder.jpg)
[1] D3D Extruder Holder. File:Motor interface.fcstd , File:Motor interface.stl
File:5015blower.fcstd Blower.
File:Nema17face.fcstd Nema 17 Faceplate sketch
File:Titanaeromarcin.fcstd Marcin's Titan Aero sensor holder - not finished. Finished STL - File:Titanaeromarcin.stl
File:Fanwithholderpattern.fcstd Fan mount for a print cooling fan
![Titan Aero with blower. Download in FreeCAD format - [1]](/images/thumb/b/be/Titanwithblower.png/120px-Titanwithblower.png)
Titan Aero with blower. Download in FreeCAD format - [1]
![[2] Alleph Objects FreeCAD version of the Titan Aero extruder.See Mirrored_aero_assem.fcstd file. Note this is not what we use, but a mirror image - there are 2 versions of the Titan Aero.](/images/thumb/5/52/Titanearo.jpg/120px-Titanearo.jpg)
[2] Alleph Objects FreeCAD version of the Titan Aero extruder.See Mirrored_aero_assem.fcstd file. Note this is not what we use, but a mirror image - there are 2 versions of the Titan Aero.
![[1] D3D Extruder Holder. File:Motor interface.fcstd , File:Motor interface.stl](/wiki/File:Extruderholder.jpg)
![Titan Aero with blower. Download in FreeCAD format - [1]](/wiki/File:Titanwithblower.png)
![[2] Alleph Objects FreeCAD version of the Titan Aero extruder.See Mirrored_aero_assem.fcstd file. Note this is not what we use, but a mirror image - there are 2 versions of the Titan Aero.](/wiki/File:Titanearo.jpg)
- Overall library - [3]
- 8 mm sensor - [4]
- 8 mm sensor holder - [5]
- Heater block only - [6]
- Unmirrored Titan Aero extruder - [7]
Download in FreeCAD format - [8]