D3D v20.04

Specifications

• 12" heat bed
• 1400W heat bed
• Transitioning to OSE Universal Gearless Extruder
• Based on D3D Pro geometry

Heater Element

Notes:

• Fiberglass sleeve used - HTG fiberglass, does not flake off like standard high temperature sleeving. See [1]. Note that the resin can burn out at the 650C (1200F) workign temp.
• Inner core: 5' long wraparound of 2mm tight braid fiberglass sleeve - 600C - [2]
• This is packed into 6' of 6 mm tight braid fiberglass sleeve.