D3D v20.04.27 Build Instructions

Z Axis

1. Assemble idler side.
2. Mount idler side on bottom of frame, with nuts next to frame.
3. Assemble carriage side.
4. Open idler side, keeping it mounted on frame. This will allow fitting of axis to it.
5. Mount motor side on rods, keep loose.
6. Fit motor side to frame, hanging it on the top of the frame, and adjusting rod lengths so they are slightly above the working surface.
7. Take off axis, mount motor, tighten motor side fully.
8. Mount motor side

Links

• D3D v20.04.27