Module Designer

Goal

• Goal - generate blueprints for modules. (in which case the location would not even be needed).

Process

1. Design module. Put everything needed in there.
   1. Apertures, wiring, blocking, plumbing, water, components - this is how we 5x the module build speed.
2. Put it in the right location in the house.

1. Example - I1 -

Floor 1 Process

coordinate is 'left side top of foundation' at 0,0,0

1. Design Wall Module 1-30 (structure)
2. Parameters - wall module type.
   1. There are n types - corner, reg, door, window, double door
3. Add electrical outlets
   1. Start at Breaker Box Module
4. Add Service Devices (breaker, transfer, inverter, etc)

1. Add lights