Recyclable Electronics

• Circuit board is etched, routed
• Surface mount components attached with paste, reflow
• Thru-hole can be mounted if needed - though these should be on a separate board for simplicity, which can be socketed design for zero solder
• Permanence on socketed design is via epoxy layer - ruggedization, vibration, space, war
• Socketed components have plug-in devices with heatsinks, socketed devices are thus infinitely scalable
• At the final level, the circuits are deposited, not etched. At this higher temp, the circuits can be likewise recycled by separation, typically copper? deposited on high temperature ceramic
• 100% recyclability, zero waste, reconfigurability. Authentic Construction Set approach.
• Ceramic is produced in house
• Copper is recycled in house
• Relates to Air Separation and cryogenics for generating argon shielding gas, also used in welding, laser 3D printers, and other hot metal processing.