LifeTrac v20.12 3D CAD

From Open Source Ecology

Revision as of 01:38, 1 July 2024 by Marcin (talk | contribs) (→‎From Universal Track Unit)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Summer X 2021 Version

Frame - File:Lt2012frame.fcstd
Shaft Assy - File:Lt2012shaftassy.fcstd
Motor Assy - File:Hydmotorcouplerassy.fcstd
Square Clamp - File:Squareclamp.fcstd
Tractor - File:LT2012.fcstd

From Universal Track Unit

Design Consideration

5 minute wheel exchange.
UTU or UWU options
But, existing UTU is not 5 Minute Design

Gallery

Dual purpose Universal Track Unit Assembly. Can be driven either with wheel drive or track drive. - FreeCAD -File:Dual UTU.fcstd
Universal Track Unit Assembly from parts. - FreeCAD -File:Utu assy2.fcstd
Hydraulic motor coupler assembly only. - FreeCAD -File:Hydmotorcouplerassy.fcstd
Through keyway hub with track drive. - FreeCAD -File:Throughkeywaysprocket.fcstd
Modular track wheel. - FreeCAD -File:Trackwheel.fcstd
Idler. Specification of 10" pipe sections used in idlers - [1] - 10.75" OD and .365" wall - FreeCAD -File:Idlerslibrary.fcstd
Modular track unit track. Made using Path Array. FreeCAD file -File:Trackunittrack.fcstd
Track Drive Sprocket. - FreeCAD -File:Drivesprocket1.fcstd
2" Bearing - FreeCAD -File:2inchbearing.fcstd
Extreme Hydraulics Motor EXT-M598WMB - FreeCAD -File:EXT-M598WMB.fcstd.
Big motor drive sprocket - FreeCAD -File:BigDriveSprocket.fcstd.
Coupler for Small drive sprocket and Extreme Hydraulics Motor EXT-M598WMB - FreeCAD - File:ShaftSprocketCoupler.fcstd
Drive Chain made using 100 Pitch Chain and Path Array- FreeCAD - File:DriveChain.fcstd
Motor Drive module, parts list in the file page- FreeCAD - File:MotorDrive.fcstd
1 7/8" Bearing- FreeCAD - File:1inch875Bearing.fcstd
1 7/8" Track Idler Shaft- FreeCAD - File:1inch875IdlerShaft.fcstd
Small Motor Drive Sprocket- FreeCAD - File:SmallDriveSprocket.fcstd
Track Idler module- FreeCAD - File:TrackIdler.fcstd
1 7/8" Track Drive Shaft- FreeCAD - File:1inch875DriveShaft.fcstd
Track Drive module- FreeCAD - File:TrackDrive.fcstd
Coupler for Track Drive Sprocket and 1 7/8" Track Idler Shaft or 1 7/8" Track Drive Shaft- FreeCAD - File:TrackSprocketCoupler.fcstd
Frame Cover- FreeCAD - File:FrameCover.fcstd
17 teeth 100 pitch Sprocket- FreeCAD - File:17teeth100pitchSprocket.fcstd
35 teeth 100 pitch Sprocket- FreeCAD - File:35teeth100pitchSprocket.fcstd

Retrieved from "https://wiki.opensourceecology.org/index.php?title=LifeTrac_v20.12_3D_CAD&oldid=298065"