Steam Engine Construction Set

From Open Source Ecology
Revision as of 01:40, 3 February 2009 by WikiSysop (talk | contribs) (→‎Links)
Jump to navigation Jump to search

Introduction

Steam engines are a robust energy source which played a main role in the industrial devolution, and may now be a viable candidate as an engine of the post-industrial revolution. Tinytech in India manufactures steam engines for various industrial swadeshi applications, primarily in India. We believe that steam engines, coupled to flash steam generators, are also relevant as an appropriate technology choice in the 'developed' world. As such, we are proposing an open source steam engine project, to deliver an appropriate technology, modern steam engine:

  • Open design
  • Scalable in power from 5 to 100 horsepower
  • May utilize electronic valving for mechanical simplification
  • May be coupled direcly to linear hydraulic pump - feasibility study required

In particular, Factor e Farm is interested in utilizing these steam engines in the LifeTrac line of tractors, cars, and solar turbine electrical generators.

Design

Link title==Engine==

Typical Engines

Typical steam engine cylinders are made from cast iron. (What is the best metal to use for a steam engine?) Given that water is the working fluid, lubrication is required in the cylinder. (Is there any way to prevent corrosion otherwise?)

  • Cylinder - cylinder is made from cast iron.
    • To cast this cylinder from scrap iron, use a (how many?) pound melt, and use a simple melting furnace such as (here?)

The simplest way to cast a cylinder

Green Steam Engine

An alternative engine design that may be worthy of further evaluation can be found [1] here. It looks as though o-rings are used in place of traditional tight tolerance cast iron cylinder boring. Presumably this method is only good for low pressure and temperature steam. The linkage and valve system is highly innovated and would require no precision machining.

  • Marcin says: I looked at this in detail 2 years ago, and purchased plans. When I asked for references of people who built this engine, the inventor did not provide me with any. I became suspicious about the effectiveness of the engine. Since then, I've heard reports from several sources that longevity and performance are questionable. In summary, if this worked as stated, we would see a large number of implementations on the internet. Since these are not to be seen, it does not appear to be a promising design.

Boiler

A simple boiler implementation involves a Babington_Burner heating the inside of a 6 inch metal pipe of 1/8" wall thickness. A 100 foot long coil of 1/2 inch steel tubing is placed inside this coil, and an electronically-controlled Valve delivery system (note: in steam engine case, the 'solar boiler' in last link is replaced by the above 100-foot coil of steel tubing.

Materials


Boiler Fuel: For transportation vehicles some biomass fuel energy densification is required. Pyrolisis fuels without elaborate processing look prmoising here is a brief summary of some methods http://www.ars.usda.gov/sp2UserFiles/Program/307/biomasstoDiesel/RobertBrown&JenniferHolmgrenpresentationslides.pdf http://www.biomasscombustion.com/horizontal_grate_technology.htm

Stationary applications can probably get by with a simple style grate biomass boiler. http://www.biomasscombustion.com/horizontal_grate_technology.htm

Design Evolution

  • Initial design, 1.8.09 -

Steam Engine Concept.jpeg

Crankshaft eccentric.jpeg

3D Initial Model 1/19/09 Crank Assembly 2.jpeg

Bill Of Materials To Date

QTY Description Price Location

  • 1 Cylinder 38.03 [2]
  • 1 Piston 3" x 5/8" Cold rolled Steel 9.97 [3]
  • 1 Shaft 1" 13.01 [4]
  • 2 Plate 1/2"x6"x6" 17.71 [5]
  • 1 Flywheel 8"x2.5" Cold Rolled Steel 74.3 [6]
  • 1 Eccentric 4.5" x .5" Cold rolled 13.95 [7]
  • 2 .5" Dia Pin 1.75" Long 6.29 [8]
  • 1 Lower Connecting rod 5/8"x1"x6" 9.91 [9]
  • 4 3/4"x1.5' Threaded Rod 14.64 [10]

Baseplate TBD Stuffing Box TBD

  • 1 6' Sch 80 Steam Pipe 43.7 [11]

TOTAL 241.51

Example of Fully Integrated Steam Energy System

Integrated Energy System.jpeg

Description of this system by author and excellent background info on homepower steam http://www.fastonline.org/CD3WD_40/JF/JF_OTHER/BIG/Reciprocating%20Steam%20Engine.pdf

Apparently Skip Goebel thinks similar to me about electronically controlled steam engines taken from http://www.mail-archive.com/sustainablelorgbiofuel@sustainablelists.org/msg01818.html

Using Solenoid Valves for Steam Engine in Place of Mechanical Valving

Fwd from [12] - a steam engine producer, which says that 'The biggest news for steam is electric valves' - see Electric Valves for Steam Engine


Electronic Solenoid Valve Info: http://www.gwlisk.com/tech_info.html

Tooling Requirements

Metal Casting

Waste vegetable oil furnace design http://www.backyardmetalcasting.com/oilburners03.html Foundry.pdf Pattern_Making.pdf

www.budgetcastingsupply.com http://www.metalwebnews.com/howto/furnace/furnace.html www.creativecastingco.com www.host33.com/casting www.backyardmetalcasting.com www.emainc.com/radnor/sand.htm http://oak.cats.ohiou.edu/~dw120996/..._of_metals.htm


Lathe

    • Romig bed lathe type - from Multimachine - Romig.jpg
    • Simple prototype, $486 in materials BOM:
      • 2 bearings, $50
      • 2 mouning plates, 1/2"x6" angle - $40
      • 4 Shaft Collars - $20
      • 2" shaft - $20
      • DOM tubing, 3", 2" ID - $15
      • 8 3/4" bolts for table - $16
      • Chuck plate - $40
      • Bolts for chuck - $20
      • Nuts and bolts for DOM - $5
      • XY table - $70 off shelf at Enco - [13]
      • Tool post - $10
      • table plate - $30
      • 2 bags of cement, 80 lb each - $20
      • sand, gravel - $10
      • TOTAL - $316
    • High performance, 2/1000" accuracy with proper technique, stock parts, 1000 lb radial and 200 lb axial load capacity

Flash Steam Generator

    • Coil bending jig - $400
    • Stainless steel coil, 150 feet - $200
    • Babington fittings and metal - $100
    • Dremel tool - $40
    • Dremel micro drill press - $40

Electrical Generator

Open Source Steam

Steam power is not taught in general. For mastering this topic, we need a Steam Power Reading List.

Letters and Communications

Letter to VK Desai of Tinytech Plants -

Dear VK,

Can you share your knowledge of steam power with us?

In order to make our solar turbine a success, we need to build the steam engine at low cost - in house. If I do my own labor, use our machine shop, and use casting in house, then the price for the engine parts should be about $150 for a 3 hp engine. Do you think that is realistic?

Please share with me your basic design. Simple drawings on the back of an envelope would do. I am smart at studying design. Please just give me the essentials and material specifications.

Please respond, or put your notes up directly at:

http://openfarmtech.org/index.php?title=Steam_Engine_Construction_Set

If you have any pictures of steam engines in fabrication, please share.

Sincerely,

Marcin

Response from Mike Brown Steam engines

Nick,

Skip Goebel is in Peru, do you have the DVD he did on building a prototype boiler?

I doubt if your solenoid valve will last six months on a steam engine.

Sorry, we don't get involved in other people's engineering projects (we average two emails like yours a day).

Best wishes, Mike


nick raaum wrote: Mr. Brown, I have been working lately on developing a simple horizontal uniflow steam of 3" x3.5" bore and stroke that is controlled by an electronic solenoid valve and a small programmabale logic controller. My full intention is to power this engine with a gasifier monotube style boiler and utilize the exhaust in a 750 gallon thermal storage tank for home heating purposes. In my research in this project I found reference to Skip Goebel's work through your site.

that Skip Goebel may already be building a boiler of similar design, if possible could you give me his contact info? I would also be interested to know if you have given any thought to developing an electronically valved steam engine? I intend to try an asco 1/2" direct acting steam valve that claims to cycle at 800cycles/min for a million plus cycles. I intend to run my engine at 100rpm which in theory may give my controll of the cutoff ratio in increments of .25. This obviously will not be efficient but I want to try the concept first. Perhaps you know more about what this actually would take? In any case I do appreciate your time to read this email and I hope you keep up the good work in small scale steam power development.

Sincerely, Nick Raaum

seek out mike brown steam engins on google

Skip Goebel Sensible Steam Peru s.a.c. Lima, Peru Lima 51 996 984 741 US· 559 922 2410 www.sensiblesteamperu.com



From: nick raaum <raaumn@hotmail.com> To: info@sensiblesteamperu.com Sent: Monday, January 26, 2009 10:22:16 AM Subject: Wood Fired Monotube Boiler

I came across your site in studying the works of Skip Goebel in home powered steam systems. I intend to build a 3kW cogeneration DC system for home and experimental use. All my research leads me to conclude that Mr. Goebel may have pioneered this idea the furthest and I would be interested in purchasing any information that he has made available on the subject.

I'm not unfamilar with steam, I worked 2 years as Mechanical Engineer at a 400MW coal fired power plant, but am now envisioning working on something a little more decentralized. In any case I strongly feel the case for more self sufficient energy systems is here and given the fuel flexibility and reliability of the steam engine I wish to pursue this idea further. My plan is to construct a simple monotube fired 3kW mechanical valve steam engine to charge my DC battery bank and thermal storage tank. After I am comfortable with this design I would like to investigate the potential improvements of using a low cost programable logic controller for boiler control. Additonaly I am looking for a a high speed durable solenoid valve and the right steam valve to investigate the possibility of electronically conrtolling steam into the engine.

Right now I am thinking that I could use a control loop to continously vary the cutoff ratio of the steam engine for my governor. This would optimize efficiency by running with the lowest allowable cutoff ratio. In any case it seems at least feasible to think that in the future steam engines efficiencies can be improved by better steam control which is one more reason that this technology attracts me. So if Sensible Steam has any information avaialable by Skip Goebel on steam engine system construction and experiences with it I would be very eager to hear more about it how to get it.

Sincerely, Nick Raaum


Letter to Valve manufacturer; We do not have any valves capable of handling 600F steam.


Alan Nelson

Fluid Process Control Corporation



From: nick raaum [14] Sent: Saturday, January 31, 2009 12:30 PM To: Alan Nelson Subject: Atkomatic Solenoid Valve Response Times


Alan, I am looking at your atkomatic line of solenoid valves and would like to know if you offer anything suitable for the a 2-way continous duty pulse cycle valve for saturated steam up to 600 deg. The valve also needs to have a very fast response time of 75ms for open and 75 ms for close. Is there anything in the atkomatic line that might fulfill that response time requirement? If not do you know what other type of valve I might try looking at for that desired response time? Thank you for your time.

Regards, Nick Raaum

Windows Live™ Hotmail®:…more than just e-mail. Check it out.

Development Team

  • Nick Raaum - Project Manager. He works at a coal power plant, but his visions are different.

Nick.jpg

  • Marcin Jakubowski

Marcin sm.jpg


Links

  • Biomass CHP with steam engine - [15]
  • 60% vapor cycle efficiency in steam engine power plant? - [[16]]
  • $300/hp steam engines in production, Peru - [17]

Steam Engine History:

Steam Engine Primers/Groups:

Engine Plans/Products:

Misc:

Nick R. says, what are the limits to lathe boring diameters in cast iron? This [20] method of construction looks simple and attractive if it could be scaled up enough?

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Steam_Engine_Construction_Set&oldid=4729"