CEB Press Operation and Safety - video

Overview

http://www.youtube.com/watch?v=suxEJFXj1b4&feature=youtu.be

Operation

For first time startup.

The machine comes with

1. Check connections in the controller box and tighten with a screwdriver if necessary
2. Check connections from the controller to the solenoid valves
3. Check that hydraulic hoses are tight and tighten if necessary
4. Connect power to the controller.
5. Upload CEB Testing Code to

Troubleshooting

If machine is not receiving hydraulic power, first check the flowchart for Hydraulic System Troubleshooting.

Then check the [

Repair

  2.5.4  Basic Troubleshooting SkillsThe CEB is designed for disassembly, meaning that many parts can be replaced readily from steel stock sections. We recommend a visit to a local metal fabrication shop to secure parts. All parts may be fabricated with a welder,  See the exploded parts diagram for a complete list of parts and identify the part that is broken.

Refer to the A-Z Instructionals or CEB Fabrication Drawings to identify the fabrication requirements for the part, and take the instructions to your fabrication shop.